1 / 5
Puffy Bubble Letters & Numbers A–Z 0–9 | Full-Plate Wall Art — image 1
1 / 5

Puffy Bubble Letters & Numbers A–Z 0–9 | Full-Plate Wall Art

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Big, fully rounded bubble letters with a flat back for name signs, nurseries and playrooms. 250 mm tall, no supports.

Rating
0 / 5
Likes
2
Downloads
21
Makes
0
Views
81
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

Chunky, pillow-soft bubble letters for spelling out names, initials or words on a wall or shelf. Every letter and number is fully rounded across the front, with no flat top, and has a flat back so it mounts with command strips or double-sided tape.

What's included

• Full alphabet A–Z and numbers 0–9, one file per character

• 250 mm tall at full size (fills a 256 mm bed); scale down in your slicer for smaller printers or sizes

• 36 mm deep with a smooth rounded front and a flat back

• No supports and no brim needed

• Designed from the Fredoka typeface (SIL Open Font License)

Print settings (what we use on a Creality K2)

• PLA, 0.4 mm nozzle

• Layer height 0.08 mm for the smoothest dome (0.12 mm is a good faster option)

• 3 walls, inner then outer, outer wall 40 mm/s

• Scarf seam if your slicer has it, aligned to one edge

• 10% gyroid infill, 12 top layers

• Flat back on the bed: no supports, no brim

• At 250 mm and 0.08 mm layers, expect about 15 hours and 200 g per letter

Finishing (optional)

For a glossy, ceramic look: sand at 120, 180 and 240 grit, prime, sand at 400, then paint and clear coat.

Tags