Cable Guide for 10x 6mm cables for Simrig - MMU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual colour chequered flag cable guide for 10x 6 mm power and encoder cables on a sim racing motion rig.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Cable guide for managing 10 cables of 6 mm on a sim racing motion rig. It guides the power and encoder cables from the drives to the servo motors and keeps them neatly side by side.
The top carries a chequered flag. The model is made for dual colour printing with a Prusa MMU3 (shown in black and red).
Size
100 x 50 x 10.8 mm. The chequered flag is two layers high at a 0.4 mm layer height, so the colour change is quick and uses little filament.
Printing
Print with the flag face down on the print bed. Use two filaments (MMU) and set the flag squares to a different extruder than the base. The files are included as two separate STL parts that line up with each other, so load them together as one object with multiple parts in your slicer.
If you build one, please post a make!