1 / 1
Dimmer knob + cover for Busch-Jaeger Reflex SI (or similar) — image 1

Dimmer knob + cover for Busch-Jaeger Reflex SI (or similar)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement rotary knob and cover plate for a Busch-Jaeger Reflex SI style dimmer insert (metal mounting plate, T1.25A f

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
34
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Fits

Series: Busch-Jaeger Reflex SI (and possibly similar) Button supports a stroke of 5mm push-in function for turning the light on and off.

Dimmer shaft: 4 mm

Check the shaft and cover dimensions against yours before printing. The Fusion file is included for fine-tuning.

Print settings

  • Printer: Prusa MK3

  • Material: [PLA/PETG] (grey-blue in the photos)

  • Layer height: 0.35 mm | Walls: 2 | Infill:  15 %

  • Orientation: Front on the bed to get the fuzzu bed texture

Installation

  1. Install with the power off (switch off the breaker and check with a voltage tester).

  2. Remove the old knob and cover.

  3. Push the new knob onto the 4 mm shaft, then fit the cover plate.

  4. Once fitted, only the knob and cover are touchable, so it's safe to switch the power back on.

Never touch the dimmer insert itself with the power on. If unsure, ask an electrician.

Disclaimer

Not affiliated with Busch-Jaeger. Print and use at your own risk.

Tags