Dimmer knob + cover for Busch-Jaeger Reflex SI (or similar)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement rotary knob and cover plate for a Busch-Jaeger Reflex SI style dimmer insert (metal mounting plate, T1.25A f
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits
Series: Busch-Jaeger Reflex SI (and possibly similar) Button supports a stroke of 5mm push-in function for turning the light on and off.
Dimmer shaft: 4 mm
Check the shaft and cover dimensions against yours before printing. The Fusion file is included for fine-tuning.
Print settings
Printer: Prusa MK3
Material: [PLA/PETG] (grey-blue in the photos)
Layer height: 0.35 mm | Walls: 2 | Infill: 15 %
Orientation: Front on the bed to get the fuzzu bed texture
Installation
Install with the power off (switch off the breaker and check with a voltage tester).
Remove the old knob and cover.
Push the new knob onto the 4 mm shaft, then fit the cover plate.
Once fitted, only the knob and cover are touchable, so it's safe to switch the power back on.
Never touch the dimmer insert itself with the power on. If unsure, ask an electrician.
Disclaimer
Not affiliated with Busch-Jaeger. Print and use at your own risk.