Liczymy pasujące modele…
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
simple cable case for miniswitch
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V2. I made three versions for single, double and triple frames. The versions for double and triple frames are designed for a plug in the lower hole and…
I created this housing for an AmazonBasics Dimmer switch ( https://amzn.eu/d/hr5qsvP ) to use with a table lamp: I added it in-line to its power cable and, while a bit bulky, means I can move the lamp wherever and still dim it. To install…
ESP CC Dimmer A Wi-Fi constant-current LED dimmer running ESPHome. Check https://github.com/flaviut/hardware/tree/main/esp_cc_dimmer for source code & the latest version. Intended use Designed to clamp onto wire shelving to dim a plant…
This model comes with a lid. To secure the lid, one brass M3 insert and one M3x20 screw are required.
I printed this out of TPU with 3 walls, 8 top and bottom layers with 20% gyroid infill. There are two types of dimmers here to account for the presence of a screw head protruding from the behind the knobs. On my range, I needed one of the…
Had a few christmas lights wich were way to bright, so i used a 5k pot meter and a screw connector. Lid was not perfect yet, i my self wil screw it or glue. Screw holes bit to small, just tested but need a small screwdriver If you want…
IKEA MOLNART cylinder bulb: https://www.ikea.com/ca/en/p/molnart-led-bulb-e26-150-lumen-cylinder-glass-striped-00586770/ IKEA TVÄRHAND lamp: https://www.ikea.com/ca/en/p/tvaerhand-table-lamp-black-bamboo-60518410/
I needed a box for 30 channel dimmer from SOH company ( https://eshop.soh.cz/stmivace/i431-dmx-30-led-dimmer-120a/30v-vcetne-indikace ) I printed it from PC/ABS as i needed higher temperature resistance, possible fire resistance (and i…
I've modified the original design to easily fit both Shelly Dimmer 2 & Shelly Plus 1PM I also did not like threading the cables through the holes in the side walls, so I've modified the model to have a channel for all cables going to the…
My kids broke the dimmer knob in our bathroom. And instead of buying a 10 euro replacement I designed a new one in Fusion 360. This model is stronger then the original and takes less then an hour to print. I printed it in PLA+. The…
Covers for light switches and dimmers to prevent someone turning them off at the switch when you have a smart home. Magnets attach the cover to a standard UK switch front plate. The holes are sized for 6x3mm magnets.
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…
Every Philips Hue switch solution for rockers (paddles) requires rewiring, which I didn't want to do. Nor did I want a Philips Hue switch stuck alongside my legacy rockers. Also, I no longer needed 2 switches on my 2-gang, instead, I…
Created to reduce the brightness of the Hestiapi as there is no brightness control. This was mainly created to expand my personal knowledge using cad software and testing transparency with filaments. The screen height is 0.2mm (one…
Slim Philips Hue Dimmer Switch Plate with a pocket on the back to super glue the magnet found inside the original Phillips Hue Dimmer Switch Plate. Three design files included: One with mounting holes to secure to an existing Toggle…
This simple case consists of two parts: a top part featuring a 7mm hole on its top face to fit a potentiometer ( this type ) and another 12mm hole on its side to fit a 2.1mm barrel plug ( this one ). There is also two 1.5 mm holes on the…
We have Elko light switches (https://www.elektroimportoren.no/bryter-innfelt-endevender-plus-6-1-ph-elko/1410705/Product.html?Event=brandlist) around the whole house and I wanted to mount the Philips Hue v2 Switch on top of it. The…
Building a camping lantern, made this case for a PWM dimmer for it.
I was lacking a nice mount for this particular dimmer. So I decided to make my own. First model, hopefully many more to come. I recommend to print in a flame retardant filament
A wall mount for Hue Dimmer v1. Fits original magnets which are 15x2 mm. Depending on tolerance you may need to add a bit of glue to magnets. Make sure to test which magnet orientation works best - it will be the difference between the…
I made this to replace the dimmer wheel on the aw11. Fit is meant to be very tight, factory wheel has a metal insert for fitment, this is just all solid plastic. Print in a stiff and heat/uv resistant material. ASA will likely be fine.…
A support allowing to attach a foot-operated lamp dimmer to a tea table leg, in order to keep the dimmer from being pushed away while using it.
The old Philips Hue dimmer switch has a design flaw causing it to break and the battery not sitting tight. This part replaces the broken thin piece of plastic that hold the battery cover tight. It's a very small part, don't use old…
Holder brackets for rear fixing of ' Lytworx Night Light Dimmer Switch ' Both smooth and fuzzy versions attached.
This Smart Knob Dimmer sleeve (bearing?) will make the knob operation less wobbly and gives the cheap device a confident touch. “It punches above it's weight.” But kidding aside, the sleeve minimizes much of the wobbliness caused by the…
English The frame is assembled in the same way as the original frame of the light switch. For the new dimmer you need 4 (two are probably enough) 3.5x16mm countersunk head wood screws. I modeled the models based on my Busch-Jäger Balance…
About This is a printable replacement cover for the Hue dimmer V1 battery cover. I designed it due to to my original cover having a stuck screw. I had to damage it in order to get it out. Printing .12 layer height white PLA or PETG Enable…
I designed a small housing for a PWM LED Dimmer i found on amazon. The designs which are on printables do not meet my expectations so I decided to design one by my own. You need 1x Housing 1x Cover 1x PWM Dimmer…
I needed a cover for my light switch, a Berker S.1 to hide it under a Philips Hue Dimmer Switch v1. I found a model which I designed a bit to make it smaller and this is the result. Note that this fits the original dimmer switch from…
Replace a standard US light switch with a holder for a Philips Hue Dimmer Switch.
This is a replacement nut for Elko Dimmer frame. It fits the obsolete Elko 400GLI dimmer and probably other models as well.
This will fit a Phillips Hue dimmer switch over your existing rocker switch. It will still allow for access, just by removing the magnetically mounted switch or the entire mount. I have metal switch plates, so I used magnets to attach…
This replacement switch plate lets you cover your US toggle switch with a Philips Hue dimmer switch. Does not use the original hue switch plate but does use a magnet from it. Removing a magnet requires damaging the original hue switch…
I remixed the version of the old hue dimmer switch to the new design which is a little bit different and designed it as deep as possible, so that it looks more subtle. Thanks for the idea and design from the original. You need also "GIRA…
First of all I want to thank @ Nelovy_08 for the model he provided. I remixed the model since I needed a bracket to hold a shelly plus 1 PM - 2 PM, also gen3, dimmer, i4 (and other shellys with the same shape) with the “plus Add-On”. The…
This was made to allow me to wall mount my Moes Smart Zigbee dimmer. Im using 4.2x13mm screws to mount it to the frame. Join our Discord server: https://discord.gg/JzRWzayqMQ
This model comes with a lid. To secure the lid, one brass M3 insert and one M3x20 screw are required.
This is a mounting plate for the Kingpin Touch Dimmer light switches, designed to fit the corner slots in the Super Pacific X1 camper. Prints in two parts: the front plate, and a snap-on lid in the back to hold the switch in place. The…
This is a magnetic lamp dimmer for a lamp from ikea which uses printing paper to make the light not as strong. It uses 4 pieces of 5x1.5 mm magnets to secure itself to the lamp which can be inserted if we pause the print just before it…
This adapter allows your Phillips Hue Dimmer switch (original model with on/off buttons) to fit on top of a Decora light switch. For the 2nd gen dimmer, see here . This provides an ideal solution from a UX standpoint as the original light…
This adapter allows your Phillips Hue Dimmer switch (2nd generation model with Power / Hue buttons) to fit on top of a Decora light switch. Model for the first gen dimmer can be found here . This provides an ideal solution from a UX…
This adapter allows your Phillips Hue Dimmer switch (2nd generation model with Power / Hue buttons) to fit on top of a TRIPLE (3x) Decora light switch. This provides an ideal solution from a UX standpoint as the original light switch is…
This adapter allows you to fill an empty light switch slot if you're using the 2nd Generation Hue Dimmer decora adapter. This provides an ideal solution from a UX standpoint as the original light switch is not visible to the user, so they…
Enclosed is a print for a drill and glue-free installation of the Hue Dimmer Switch on a Jung LS switch / socket outlet program. Simply print in PLA and mount behind the cover. Installed in just a few minutes.
Enclosed is a print for a drill- and glue-free installation of the Philips Hue Dimmer Switch on a Jung LS switch/socket outlet program. Simply print in PLA and mount behind the cover. Installed in just a few minutes. Hue Dimmer base plate…
LED dimmer knob. It is for dimmer from Aliexpress - original was to small.
This model is a simple cover that can be put over the existing lamp shade of an Ikea Lamp. I sometimes prefer working with a dim light, and the Ikea lamp I have is a bit too bright fro my liking. Print with the following settings, out of…
This model has the following features: Designed specifically to fit into the holes of an IKEA Relatera desk. No supports needed on any of the parts (assuming they are printed in the orientation given in the STL files). Touch switch and…
This lets you mount your Hue Dimmer (v2) inside a double Elko Plus frame. Since the new Hue Dimmer has a magnet inside i designed this to mount tho allow the dimmer to be partially proud of the adapter. The Dimmer fits snugly inside the…
Měl jsem doma navíc kulatý teploměr s vlhkoměrem a neměl využití a proto tenhle nápad .., Tak si to užijte ..
Our bathroom has dimmer switches that I'm too lazy to replace, but the installed lights are not dimmable and are flickering when someone bumps that. This little plate that prints in a couple minutes slides right into the dimmer slot and…
In a new house I've been moving some light switches, and one dimmer is without a knob on the slider. A classic application for 3D printing. Rather than design a new one, I found @kg333's fine model and started there. I'm a fan of…
Takes some space in the already cramped box, so you may prefer the original with supports rather than this without.
Printed in Prusament PETG Signal White. The magnets are 10x1.75mm glued with super glue. Designed to stick to a wall with double sided tape
A holder for a shelly dimmer, u can put it on a rig and it will organize all ur shelly's.
This is a 2 gang remix of a 1 gang design originally posted by TJroune which appears to no longer be posted. Fits 2 15x3 neodymium magnets. Note. This will only work with the Gen 1 hue dimmer. It will not fit Gen 2 (with the hue button on…
Enclosure for HM-LC-Dim1PWM-LinearPWM See also: https://github.com/psi-4ward/HM-LC-Dim1PWM-LinearPWM For assembly a screw 2.9x19mm is needed.
I made a housing for the Gledopto ZigBee Triac AC Dimmer, so i can use it to replace a cable switch for a light, and make all lights that are in a wall socket zigbee dimable and switchable. This way i can move the lights around an not…
Quick and easy mount for the Lutron Dimmer Switch I used an M3x6 to attach the dimmer base to the mount, then a piece of double-sided tape between the mount and the wall
Druckeinstellungen: Deckel : Supports: no Resolution: 0.2 infill: 25% Gyroid ( for less light transmission with white color ) Drehscheibe: Supports: yes Schraube/Griff Resolution 0.1
My Shelly Dimmer 2 enclosure, designed as part of this video: Designed for Shelly Dimmer 2, but may fit other Shelly products too. Hardware Use 2 x countersunk M3x12 machine screws to secure the case halves. Top & Bottom is a tight fit,…
Enclosure for Zooz dimmer to neaten up all the wires, and reduce the fire hazard in my plenum space. I also made an RGBW tape endcap and a dupont crimp terminal cover for this project, linked below. Dupont Crimp Cover…
I use a lot of these Zigbee dimmers - and for easy usage in CAD when making boxes etc. I use this model. This specific device is sold by the following brands: Sunricher Nordtronic Candeo Envilar Heimgard Icasa Jumitech Light Solutions…
Needed a replacement knob for our dimmer switch. Figured we weren't alone.
Dimmer Knob Replacement This is a 3D-printable replacement knob designed to fit Gira dimmer switches. It uses a press-fit design, so no extra hardware is needed. Easy print. Printing Details: I printed it in ASA filament, but PLA or other…
Tactile replacement knob for dimmer control of espresso machines. The finger dish on the front allows you to judge the setting while watching the extraction. Depth of shaft pocket is set for the turn on/off length of dimmer. Stretch in…
Light Dimmer Knob with 4mm stock I also attach the fusion360 source file for your needs
Two-gang wall light switch plate with slots to hold two Philips Hue dimmer switches (V2). Use this if you wish to replace your the light switches with Philips Hue remotes, hard-wiring the old switches to permanently-powered and relying…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
This is an adapter plate to mount an IKEA E1743 switch to an old kopp rocker/rotary dimmer if it has been disconnected for the use of smart bulbs.
Inner part to fit Aquara Dimmer EU H2 into Gira Frame. By resizing of the inner negative form it can be adjustet to different switch types
📎 Design Source View and modify the model here . (Onshape) Broke your dimmer? No problem, just measure and enter the size of the dimmer, and you can print a new one! Easy to print
This is the wall mount that the original Hue Dimmer Switch V1 faceplate snaps into. You can screw it to the wall or 2 sided tape it on. It's designed to be exactly like the original and snaps right in. Versions: V1 First upload…
Modified it to be skinnier and longer to accept the mounting plate. Made for an electrical cord add-in, one end goes to the plug/outlet, the other goes to the device or light
SethBon's Light Bar for Prusa i3 Mk3/S/+ model is a fun electronics project and a really well-designed overhead printer light. The rotary dimmer switch I had on-hand is too big to fit onboard so I made this housing and junction box.…
The ring has an inner diameter of 6mm. The plate on the bottom has a diameter of 15mm. For me the diameter matches perfectly the Busch Dimmer 2250 U. ------------------------------------------------------------------------------------ Der…
Repairs Elko L3033 light button by adding additional structure inside of existing button. It will look exactly the same as original part, but will function much better and last longer. Print part from ABS or ASA because it needs to handle…
I have Jung LS 990 frames all around my house, which are nice, but most third party devices, especially smart switches and such, are made for the Gira 55mm system, such as the aqara dimmer H2. I created a simple adapter plate here that…
This mount fits the wall plate that comes with the Hue Dimmer Switch while still allowing you to access the original switch below. No additional hardware required, just remove the original wall plate frame, switch covers and screws. Screw…
Höhe geändert auf 40mm, so passen auch 5er Wago Klemmen
This inline smart switch case is designed to house the Moes Dimmer Module (MS-105Z) , providing an easy and safe way to add a smart switch or dimmer without the need for in-wall installation. The module is mounted to the 3D printed case…
A 1:1 replica of the real life A320 Dimmer Knob that sit underneath the Glareshield. Files include multiple objects that are different colors. Print with black and white PLA. Designed to mount on a standard 6mm potentiometer shaft and…
This allows mounting of dimmer switches to control the lights of an Airstream basecamp. The interior LED lights are too bright for many times. The Dimmers - Acegoo 12V Dimmer Assembly: (Sorry i didn't take pix) Remove faceplate (a knife…
Print with a brim (inner / inside brim only). Supports are optional, if you prefer to use them.
This is a Skadis mount for Yeelight smart dimmer module.
This 3D Printer control panel combines a USB port and an LED Lighting Dimmer which can be mounted on any 2020 extrusion. I mounted mine on the front of my printer but it will work on the side or back as well. The USB port uses an…
This is an LED Strip Lamp for 3D Printers. It works especially well on aluminum extrusion style Prusa i3 Printers but can be attached to almost any printer.. The design includes brackets for the lamp and a custom box for the dimmer. You…
This is an LED Strip Lamp for 3D Printers. It works especially well on aluminum extrusion style Prusa i3 Printers but can be attached to almost any printer.. The design includes brackets for the lamp and a custom box for the dimmer. You…
