Hue Dimmer v2 battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost the small battery cover on your Hue Dimmer v2 like I did? Well you're in luck because I made a replacement!
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 551
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Phillips Hue Dimmer v2 Battery Cover
Lost or broke the small battery cover on your Hue Dimmer v2 like I did?
Well you're in luck because I couldn't find any replacement parts before I made this one, so I guess you're welcome!
It's a very small & thin piece that looks almost identical to the real one.
How to print:
I recommend printing 4 pieces with every other scaled down by 1%
So you'll print them like this:
- 100% X, 100% Y, 100% Z
- 99% X, 99% Y, 99% Z
- 98% X, 98% Y, 98% Z
- 97% X, 97% Y, 97% Z
One of them should always fit after printing the set of four like this!
Installing the battery cover:
Take the 4 parts and start off with the 97% version, if that one has too much space go up to the 98% version and so on.
However, do not press it in if it feels snug! it should be able to fall in the slot quite easily and you should be able to “twist to lock” it like the original part.
This is what it looks like after installing it:
