Duplo compatible clip for brio tracks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This clip can be used to build brio-compatible track bridges supported by duplo 2x2 bricks.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 295
- Makes
- 8
- Views
- 1,150
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This clip is perfect in combination with duplo 2x2 bricks to build stable supports for brio track bridges.
Check out my other models to build a sloped ramp for those bridges:
- https://www.printables.com/model/188546-brio-compatible-ramp-segment
- https://www.printables.com/model/188560-wedge-shaped-duplo-compatible-brick
There are two variants of the clip, one with cut-outs that avoid collision with the ramp segment. The other one (planar) maximises the support area for straight and curved rails.
For a multi-level bridge system, you may want to check out BeamBridge by designer Dejf.
Please make sure to print with quality, not-too-brittle material and to tune the print settings for good layer adhesion. Otherwise, the clamps may break easily.