Duplo compatible clip for brio tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip can be used to build brio-compatible track bridges supported by duplo 2x2 bricks.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 295
- Wydruki
- 8
- Wyświetlenia
- 1150
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This clip is perfect in combination with duplo 2x2 bricks to build stable supports for brio track bridges.
Check out my other models to build a sloped ramp for those bridges:
- https://www.printables.com/model/188546-brio-compatible-ramp-segment
- https://www.printables.com/model/188560-wedge-shaped-duplo-compatible-brick
There are two variants of the clip, one with cut-outs that avoid collision with the ramp segment. The other one (planar) maximises the support area for straight and curved rails.
For a multi-level bridge system, you may want to check out BeamBridge by designer Dejf.
Please make sure to print with quality, not-too-brittle material and to tune the print settings for good layer adhesion. Otherwise, the clamps may break easily.