Nintendo Famicom TRRS Jack Mount/Housing v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for mounting a TRRS jack in AV-modded Nintendo Famicom consoles.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Housing for mounting a TRRS Panel-Mount Jack for internal-AV-modded Nintendo Famicom consoles. This housing mounts in the opening where the original RF RCA output is (the RF metal shield must be cut or desoldered, see notes below).
Made specifically for the pictured panel mount jack (part no. PJ-399M 3/4 pins).
NOTES:
The RF shield must be cut (or completely desoldered) to remove the RCA connector plus a few components must be desoldered to make room for the TRRS jack.
The TRRS jack fits tightly into the piece so the nut is not needed. You may need to use a plier to force-insert the jack fully into the piece.
The piece is keyed since the hole in the shell is not a perfect cirle but an oval. The piece must be mounted with the flat side pointing down towards the PCB.