Yet Another Frame Babble Tracker Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are many [babble tracker mounts] like it, but this one is mine.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 67
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial
I know there's many of these already, but hey, variety!
Using a modified version of this https://www.printables.com/model/1879697-mount-base-for-steam-frame-arcturus-vision-camera , I created a tracker mount that folds flat against the Arcturus camera portion of the mount when not in use. This mount is very secure thanks to the teeth poking into the vent holes. Uses M4-20mm bolts. The nuts are ~6.9mm wide (nice) and are press-fit into the sockets.
I used PETG, which has just enough flex to get around the camera module after hooking the mount into the vent holes at the top. To remove, gently bend from the bottom with the arm extended.
Printed in PETG as oriented with tree supports. Have a hobby knife handy to clean them up. Separate by parts in the slicer if you find that the two parts fuse, however I didn't have an issue.