1 / 14
Hakki Pilke 2x Oil Cap / Öljy Korkki — image 1
1 / 14

Hakki Pilke 2x Oil Cap / Öljy Korkki

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement chain oil cap for firewood processor Hakki Pilke 2x. Öljy korkki klapikoneeseen.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Replacement chain oil tank cap for firewood processor


A 3D-printable replacement chain oil tank cap designed for the firewood processor.
Features & Specifications:
-O-ring: Designed to fit a 41x5 mm O-ring at the base for a proper seal.
-Breather hole: Features a standard M8 thread through the center. You can insert a standard M8 bolt to act as an adjustable/closable breather vent while operating the machine.
-Recommended materials: PETG, ABS, or Nylon (for chemical resistance against oil). Avoid regular PLA.
-Print settings: It is recommended to use 3-4 perimeters and around 20 percent infill.
Post-processing: If the M8 thread feels too tight after printing, you can clean it up and open it for the bolt using a standard hand tap.

If you do this, please share a photo with me.

Hakki Pilke 2x teräketjuöljysäiliön korkki


3D-tulostettava varakorkki Hakki Pilke 2x -klapikoneen teräketjuöljysäiliöön.
Ominaisuudet ja tekniset tiedot:
-O-rengas: Korkin tyveen sopii 41x5 mm kokoinen O-rengas tiivistystä varten.
-Ilmareikä: Korkin läpi menee standardi M8-kierre. Siihen voi kiertää M8-pultin, joka toimii ilmarakona/venttiilinä klapikonetta käytettäessä.
-Materiaalisuositus: PETG, ABS tai Nylon.
Tulostusasetukset: 3-4 seinämää ja täyttöaste 20 prosentin luokkaa.
Jos M8-kierre on tiukka korkin päällä, niin normaalilla kierretapilla saa sitä avattua pultille sopivaksi.

Tags