MagSafe Desk Clamp: Desk Edge Charging Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desk edge stand for an Apple MagSafe charger: printed clamp, hidden cable and screws, no glue. Plate in PLA or wood.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Standard Digital File License
MagSafe Desk Clamp: Desk Edge Charging Stand
My phone charges on the edge of the desk, and the desk stays empty. A plate holds an Apple MagSafe charger flush with the surface, a printed clamp holds it tilted back on the desk edge, and the cable disappears inside. Four parts, two hidden screws, no glue.

Wood in the Photos, PLA in the Files
The plate in my photos is wood: I carved it on my CNC. You don't need one. The 3MF has the same plate ready to print, with the same pocket, cable slot and screw holes, and I recommend printing it in PLA. It takes about 43 minutes, and the whole stand comes off your printer.

Printed Parts: Clamp, Screw with knob, Snap-on pad and Charger plate.
Wooden Plate: Optional. It's the one in the photos, and it has the same shape as the printed plate: 64 × 119 × 10 mm.
What You Need to Buy:
Apple MagSafe Charger: One, the round charger with its USB-C cable. It sits in a Ø56.2 × 5.6 mm pocket, and the plug goes through the 7 mm cable slot.
M5×12 Screws with a Low Head: Two, head Ø9.4 × 1.4 mm. The head has to stay under 1.6 mm tall to hide in its counterbore under the charger. You can find them as add-on parts in the Bambu Lab store.
M5 Heat-Set Inserts: Two, for the Ø6.4 × 10.5 mm seats in the clamp.
Nothing else: no glue, no extra hardware.
Key Features:
Charger Sits Flush: The MagSafe charger sits level with the plate.
Hidden Cable: The cable drops through the slot in the plate and runs down a tunnel inside the clamp.
Hidden Screws: The two screw heads sit under the charger, out of sight.
Fits Most Desks: Desk tops from about 8 to 30 mm thick, tightened by hand from below.
20° Tilt: The plate leans back, so the screen faces you.
Portrait or Landscape: The phone snaps on upright or sideways.
No Glue: Everything comes apart and goes back together.
Version 2.1: What Changed
This stand fought me twice. The files you download are version 2.1.
Version 2: A Narrower Plate
The first plate was 80 mm wide. My iPhone's camera bump hit it, and the phone would not stick to the charger. I made the plate 64 mm wide, and now the cameras clear it.

Version 2.1: Screw Tolerances
The pad that snaps onto the ball tip of the screw is the part that presses under the desk, and in version 2 it wobbled. I went back to the tolerances: with 0.15 mm of clearance per side the joint was too stiff, with 0.25 mm it wobbled. In version 2.1 ball and seat share the same nominal size, Ø11.7 mm, and the PLA shrink gives just the right play. The pad snaps on, levels itself under the desk and stays put.

Ball Joint: Ball and seat at Ø11.7 mm, no added clearance.
Thread: The M14×2 screw has 0.3 mm of clearance per side, so it turns freely by hand.
What's in the Files:
3MF: MagSafe Desk Clamp - All Parts.3mf, a Bambu Studio project for the Bambu Lab X2D with all four parts on two plates.
STL: MagSafe Desk Clamp - Clamp.stl, Screw.stl, Pad.stl and Plate.stl, one file per part.
Printing Recommendations:
0.4 mm nozzle, 0.20 mm layers, 2 walls, 15% infill and tree supports on the build plate only. The 3MF is sliced for the Bambu Lab X2D on the Smooth PEI plate.
Clamp, Screw and Pad (Plate 1):
Time and Filament: About 3h04 and 56 g of PLA.
Clamp: Prints with the face that touches the charger plate on the bed.
Screw: Stands on its knob.
Pad: Prints disc down.
Charger Plate (Plate 2):
Time and Filament: About 43 minutes and 25 g of PLA.
Orientation: Back face on the bed.
Colors:
Suggestion Only: The 3MF uses black for the clamp, screw and pad, and white for the charger plate. In the photos the clamp is white and the plate is wood. Any color works.
Assembly
Heat-set the two M5 inserts into the clamp.
Thread the screw into the arm from below, ball tip up, then snap the pad onto the ball.
Pass the charger plug through the slot in the plate and down the tunnel in the clamp.
Fix the plate to the clamp with the two M5 screws.
Press the charger into the pocket. It covers the screw heads.
Hook the clamp on the desk edge and tighten the knob.
Clamp it to your desk, snap your phone on, and keep the top of the desk clear.