tennis bracket on skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric mount for tennis rackets
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Hello, this is a model for a parametric tennis racket holder. It was made to replace 2 pins I had used before. This model has 2 parametric dimensions that adjust the top and bottom widths to accommodate different rackets.
It is also curved to keep the racket inside and to self-centre when placed. The design is made so the handle is at the bottom; this makes it easier to retrieve.
To simplify printing, I chose to separate the mounting system so it can be printed flat. This required a bit more troubleshooting for the mounting system due to the slotting movement, but it is accurate and holds up surprisingly well. This latch enables CAD objects in different orientations for others' work too.
Takes about 1 h and 10 min to print
Here is another version with the handle upwards
Default print settings will work