tennis bracket on skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric mount for tennis rackets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello, this is a model for a parametric tennis racket holder. It was made to replace 2 pins I had used before. This model has 2 parametric dimensions that adjust the top and bottom widths to accommodate different rackets.
It is also curved to keep the racket inside and to self-centre when placed. The design is made so the handle is at the bottom; this makes it easier to retrieve.
To simplify printing, I chose to separate the mounting system so it can be printed flat. This required a bit more troubleshooting for the mounting system due to the slotting movement, but it is accurate and holds up surprisingly well. This latch enables CAD objects in different orientations for others' work too.
Takes about 1 h and 10 min to print