CR2032 Coin Battery holder MK3
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.68 – €2.05 net (excluding VAT)
For file: Prusa Mini+ 0.4mm nozzle, 15%infill, 0.02mm quality / coin-cell-holder-mk3-v40-10xcr2032_02mm_pla_min.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.87 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.03 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple but sturdy storage for 10 CR2032 coin cell batteries.
- Rating
- 4.866 / 5
- Likes
- 386
- Downloads
- 2,735
- Makes
- 92
- Views
- 9,446
- Reviews
- 82
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Simple but sturdy storage for 10 CR2032 coin cell batteries.
MK3 has a few minor improvements over the original/MK2:
- Lip to hold the top on
- Thicker dividers to make them stronger
- Slightly more clearance to make coin cells easier to remove
- v22 has the following improvements over v9:
- Top part has a tiny bit more clearance and “teeth” to balance out the extreme grip of the v9 top. It's balanced for printing on a stock MK3S with Prusament PETG, but seems to work well for PLA as well.
- Fixed some clearance issues. Coin cells should fit equally well in all positions now.
- Fixed issues with bodies not being updated correctly when changing certain user parameters in the Fusion360 file.
Fusion360 source file has some user parameters to easily adapt the design to other coin cell sizes.
If you don't have a 3D printer and would like to buy a print of this, please visit my Etsy shop: https://www.etsy.com/listing/951889027/cr2032-battery-holder
Print instructions
Category: Containers Print Settings
Printer Brand: Prusa
Printer: i3 MK3S
Rafts: No
Supports: No
Resolution: 200 um
Infill: 20%