Fanttik Cruise V11 APEX True-Fit Gravity Holster (V2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy-duty upright wall mount and modular 6-tool organizer rack designed specifically for the Fanttik Cruise V11 APEX.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
Fanttik Cruise V11 APEX Wall Mount & Modular Accessory Organizer
A complete, heavy-duty wall-mounting storage system engineered specifically for the Fanttik Cruise V11 APEX cordless handheld vacuum and its full 6-piece accessory kit.
This setup is precision-designed for upright (nozzle-up) docking, supporting the motor base securely while allowing unrestricted exhaust ventilation and continuous bottom USB-C charging access. All 6 attachments are organized into compact, build-plate-friendly 3-slot modular racks.
What’s Included:
True-Fit Main Base Holster (Nozzle-Up Docking):
Internal Bore: 101.5 mm diameter tailored with drop-in clearance for the measured 100.4 mm motor base.
Upright Retention: A 55 mm collar height combined with a 7 mm solid bottom shelf holds the vacuum upright and keeps its center of gravity secure without forward tipping.
Dual-Direction USB-C Channels: Front and rear 28 mm radial pass-through slots tie directly into the center port, giving complete clearance for the cable plug and rubber flap whether the handle is docked facing forward into the room or folded flat toward the wall.
Exhaust Ventilation: An expanded 50 mm central turbine cutout allows the base fan vanes to breathe unrestricted while docked.
Ergonomic Front Cutout: A 62 mm throat opening provides ample hand clearance to grip the handle and lift the unit straight out without binding.
Fastener Wings: Extended mounting ears (164.5 mm total width) provide direct, unobstructed screwdriver line-of-sight with forward-facing countersinks for standard M5 or No. 10 flat-head screws.
Modular 3-Slot Accessory Racks (Print x2 for all 6 tools):
Socket Bore: 42.5 mm drop-in cups designed specifically for the measured 41.6 mm tool collar bases.
Anti-Crowding Pitch: 54 mm center-to-center spacing ensures wide brush heads and long crevice wands sit side-by-side without clashing.
Compact Footprint: At 194.5 mm wide, it fits easily on standard 220–256 mm build plates. Print two modules to mount side-by-side or stacked vertically.
Accessible Fasteners: Mounting holes sit elevated on a top header bar above the tool cups with forward-facing countersinks for easy drill/driver access.
Print Settings & Recommendations:
Supports: None needed (print both parts flat on their backplate face).
Material: PETG, ABS, or ASA recommended for garage/vehicle mounting and long-term durability. PLA works fine for indoor home use.
Wall Loops / Perimeters: 4–5 walls (crucial for structural rigidity around the vacuum holster arms and mounting ears).
Infill: 25%–35% (Gyroid or Honeycomb recommended for multi-directional shear strength).
Layer Height: 0.20 mm or 0.24 mm (standard or draft profile).
