3030 Spool holder (Hypercube Evolution)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simpler version of thing 3155344 which eliminates the ball bearings. This works better for me because it…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 60
- Makes
- 2
- Views
- 324
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a simpler version of thing 3155344 which eliminates the ball bearings. This works better for me because it eliminates the spool 'runaway' due to the very low friction of the bearings.
Included are both STL and Fusion 360 design files. If you want to change the holder's length, change the net_length user parameter in the Fusion 360 design.
I used the STL model here on the left side of the printer but it should work on both side. If you want to make the support wall visible or non visible from the front, simply mirror the model in your slicer.
I printed it with PETG for its lower friction than PLA (?). Layer height 0.2mm, 25% infill, and no material support (rotate it in your slicer to lay on the support wall).
Print Settings
Printer:
Hypercube Evolution
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm layer
Infill:
25%
Filament:
eSun PETG
gray
Notes:
Should work also with PLA or virtually any other non flexible material. I chose PETG for lower friction than PLA (?)
Category: 3D Printer Parts