Brompton GoPro mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a GoPro mount for Brompton Bikes. It's mounts on the two headset screws at the front. Having the camera…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 1
- Views
- 705
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
This is a GoPro mount for Brompton Bikes. It's mounts on the two headset screws at the front. Having the camera install this way, independent from handlebar steering movement provide very stable view point.
I printed it using PLA with material support and material cooling. PEI bed temp 70C, hotend temp 225C, and 30mm/s base speed (using high temperature and slow speed results in stronger layer adhesion).
I also cleaned it up slightly using an X-Acto knife, especially in the hexago captive nut cavity.
Printing with ABS may provide a part that is more heat/sun tolerant but I didn't bother. (using light PLA color may improve the heat/sun tolerance as it absorbs less heat).
The design was done in OpenScad (source included) and it includes code snippets from http://www.thingiverse.com/thing:62800 (thanks!). If you need to tweak dimensions you can load the OpenScad file, change some parameters and generate your own STL file. If there will be demand for customizing a few dimensions, I may be able to export them here as Customizer parameters.
Edit: added a model of a straight 2/3 gopro rod. It's a customized version of http://www.thingiverse.com/thing:62800 so no source code here. If you want to create your own customized rod you can use http://www.thingiverse.com/thing:62800
Category: Sport & Outdoors