Kärcher K5 Pressure Washer Wall Mount

A wall mount for the Kärcher K5 pressure washer (designed for the K5 Premium Smart Control), held side-on so the hose reel and the cable stay within reach. Both wheels rest in a curved cradle, between the back plate and a raised lip. The extended handle drops into a U-hook and is locked by an M8 pin.

Features

• Curved groove at the radius of the wheels (Ø 192 mm), between a back plate and a raised lip

• Two-part beam joined by a hidden tenon

• A 380 mm M8 threaded rod runs through the whole beam and clamps the two parts: a steel core along the full length

• Captive nut on the wall side, end nut hidden in a counterbore

• Rounded U-hook for the handle bar, locked by an M8 bolt under the bar

• STEP files included

Hardware

• 1 × M8 threaded rod, 380 mm, with nuts and washers

• 4 × M8 chemical anchors for the beam (or anchors suited to your wall)

• 4 × M8 screws or anchors for the handle hook

• 1 × M8 bolt for the locking pin

Print settings

• PETG, 0.2 mm layers, 5 walls, 40 % infill or more

• Each part prints flat, no supports

• Parts: wall beam (poutre-mur), end beam (poutre-bout), handle hook (crochet)

• The wall beam (182 × 240 mm) is the largest part and fits a 250 × 220 mm bed

Before you print

• The cradle is designed for wheel centres 262 mm apart: check the spacing on your machine

• Choose anchors that suit your wall

Designed with AI assistance (parametric Python script).

En français

Support mural pour le nettoyeur haute pression Kärcher K5 (conçu pour le K5 Premium Smart Control), posé de profil pour garder l'enrouleur et le câble à portée de main. Les roues reposent dans une gouttière galbée, entre le dos et un bec ; la poignée s'engage dans un crochet en U verrouillé par une broche M8. La poutre, en deux pièces à tenon caché, est traversée sur toute sa longueur par une tige filetée M8 de 380 mm. Quincaillerie : tige M8 de 380 mm, 4 scellements chimiques M8, 4 vis M8 pour le crochet, 1 boulon M8. PETG, couches de 0,2 mm, 5 périmètres, 40 % de remplissage ou plus, sans support. Vérifiez l'écart des roues (axes à 262 mm).