512 models
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This is a replica of Iron Man's iconic Mk50 arc reactor. It's printed in three parts. The main body can hold a glowing EL panel that the front plate goes over. We also designed a magnetic panel for the back so you can wear the arc reactor…
The original design was made by box and loop: original design https://cults3d.com/es/modelo-3d/variado/boxandloop , this one is modified to be able to put an elechouse v2 voice recognition module,Casco Iron Man MK5 Totalmente articulado,…
UPDATE 14.04.2024: Added “Battery pack activator” this little tool now enables you to activate your battery pack after swapping cells on the go. The BMS sadly shuts down every time you disconnect the battery and needs to be activated…
STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…
Volume knob protection for Quansheng radio UV-K5 & UV-K6 Print Settings Resolution: 0,1 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer: 4 Infill: 15% - Honeycomb Supports: No Rafts: No Filament: Any
28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas. My reason for using a 28mm GPS instead of the usual 18–25mm one is…
Updated(v2): Made some improvements. Printed with TPU. Designed for printing with 0.6mm nozzle, but should also work fine with 0.4mm one.
BN220 GPS mount for GEPRC Mark5 Allows the BN220 GPS module to be mounted on a GEPRC Mark5 with the TBS Crossfire configuration. Besides the BN220, it also houses the VTX antenna and the Immortal Crossfire T antenna. The VTX antenna and…
Two designing available, choose one, or try both. mk5-arm-guard-slim Light weight, motor installation holes: 16mm - 19mm mk5-arm-guard motor installation holes: 16mm
I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…
The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…
Presenting my GepRC Mark5 Arm Guards, designed to closely match the original ones that are included with the Mark5 frame. I noticed that the available online models often had an excess of material on the sides, and consequently, weight.…
Summary This is a model of a Mitsubishi Mirage Cyborg ZR (Colt CJ0 / Mirage MK5) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate exhaust :) After printing, the model can be assembled with…
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
Speaker adapter car for VW mk5, Seat, Skoda, VAG group, 13cm and 16cm speakers. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.26 Infill: 25% Filament: tucab PLA Black Category:…
Ford Fiesta/Fusion MK5-MK6 (2004-2008) Hood Prop Rod Clip Also work on Ford Escort/Orion 1994 (Thanks @DavideRusso_3941551 ) Print from PETG/ASA/ABS Infill 40-50% Support needed!
~ UPDATE: 03/01/2024 ~ The amazon links provided below are my affiliate links, if you use those links to buy your hardware you will also be directly contributing to me as well. Please consider using those links if you need to buy the…
When a kid spends half an hour excitedly explaining the differences between two different models of industrial signaling device to his speech therapist, in particular why one of them is his favorite, well... I was looking for a K5LA train…
20L Jerry Can
This is a DXF file that can be used to create (either by milling, cutting, or by using hand tools) a y-carriage compatible with the Prusa Mk3 Mk52 Heated Bed. This carriage will work on the Mk3, as well as the Wanhao Duplicator i3 and i3…
I Like Fun Knives. and this is fun to play with..... Which I should state. this is not a TOY. So handle with care and operate at own risk. This only needs 1 screw, a Ø3x9mm self-tapping screw. that goes in the positioner trunnion. Print 1…
Base for Quansheng radio UV-K5 & UV-K6 Previous version: https://www.printables.com/it/model/685423-stable-base-quansheng-radio-uv-k5-uv-k6-v1 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button…
Its a 2-way Molle mount for a Quansheng UV-K5 radios. Can also be used in other 25mm strapping. The mount uses a small nub against a rivet in the clip, to better secure the radio clip in place. Print settings: Best printed in 0.2mm layers…
I manually measured the arm of the new GepRC Mark5 frame (different from Mark4) and created an arm protection for it. Printed using TPU, no supports, 0.1mm layer height. Fits on pretty snug. Feel free to edit the CAD file, SolidWorks 2020…
This was created from a desire to make a grinder that was compact, east to print, easy to use and easy to store. My mother has a rather large herb garden that is constantly supplying our family with everything needed to spice up our…
This publication isn't entirely finished or organized yet as I'm currently busy with some other stuff. A better assembly/troubleshooting guide will be uploaded in the future! THE STORY: I designed this model for an exhibit at Open Sauce…
If you like this model, please consider a donation: Buy me a coffee link Print Settings: Infill of 0% is just fine Wall Count: 4 Top/Bottom Layers: 5
Snap-on dust port for the Kreg® K3 K4 K5 series of pocket hole jigs
A replacement part to add 2 SMA connectors to the Mark5 together with a GEPRC GPS (M8 and M10) Everything is pretty tight but it fits. Print in TPU. A well tuned machine can print it without supports.
UV-K5 Radio wall mount. Dual and single.
A small linear rail drawer for 7 nozzles. The version of the stl file has a little notch to help with taking it out.
This project is based on Joshua Taylor Recreator 3D MK5 project kit, allowing the conversion of an Anet A8 3D printer into a 1.75mm recycled PET filament making machine. It is suggested to print the geared parts in PETG at 4 walls and…
New knob for Quansheng UV-K5 if you lost it or just don't like the color or shape of it. With a button, you can print from ASA and smooth it nicely with acetone vapors. Print parameters Nozzle: 0,4 - O,2 Supports: NO Material: PLA, PETG,…
I did a remix of @t0b1 model, so the Quangsheng K5 Radio will fit too. Tobis model is great, btw great simple well looking design, but i need it for the Quangsheng K5 Radio. I have redesigned the holder part, so it fits for the Quangsheng…
I had already uploaded this thing to my MyMiniFactory account after I found the cover by tcurdt which had inspired me to design this cable cover to begin with. So even though this is not technically a remix, credit where credit is due for…
This is a Top Rail Spool Holder for the Longer LK5 Pro. I designed it to work with or without the "TUSH - The Ultimate Spool Holder" https://www.thingiverse.com/thing:2047554 Print Settings Printer: Longer LK5 Pro Rafts: No Supports: Yes…
Easiest remix I've done using only the text modifier in Prusa Slicer 2.6.1 to make a triangular hole as volume level marker. I've included the .3mf file so you can remix your own.
I have recreated an improved version of the Original created by GEPRC for the o3 unit. This version is more aerodynamic, has a much larger and more precise airflow inlet, along with a small lower air passage that improves the cooling of…
Ford Fiesta/Fusion (2004-2008) Diesel/Petrol Fuel cup bowden. Print from flexible filament (TPU/TPE/Ninjaflex etc.). Infill 30-40% Print Cut out the original hard plastic ring from the cup. Use a little grease on the ring for freely…
Geprc / Phisital mark5 XT60 mount. Holes diameters 3.1 mm, holes spacing 24.5 mm. You can use glue to stick the connector. Printed in PLA.
A mount for GEPRC M8 GPS and a regular SMA connector for the Mark5. I believe other GPS like the BN220 will fit but I have not tested it. Everything sit very tight but it works as this model is intended to be printed in TPU. Print with…
Ford Fiesta MK5 Suspension top strut mount & bearing Cup/Cover For Ford Fiesta MK5 facelift (2004-2008) Left and Right version (Different) Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: Min. 50% Filament: ABS/PETG/ASA
Printed with TPU no Supports (set Bridge Flow Ratio to 0.35)
The power cable of the MK52 heatbed sticks straight of the back of the printer, which is not ideal if you have a narrow desk or would like to install it in an enclosure. This cover redirects the cable to the side leaving lots of space…
Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…
If a table-sized model is too small for you, print the four parts of the model in the same color and assemble them into a larger composite model. This will create a model with many small parts. It is recommended to use cyanoacrylate glue…
GEPRC MARK5 for 03 CAM MOUNT. Its the same of original model. Left and Right model
I wanted to mount the HLGRC M100-5883 10th-gen GPS module to my GEPRC MK5D frame (Deadcat version). I could not find any mounts that use the stock antenna mounts, allowing for easy ELRS antenna and DJI O3 antenna fitting. Therefore I made…
GepRC Mark5 Arm Guards copied as close as possible to the originals. Holes are arranged to fit a 16mm motor installation size and 8mm motor mount screws. I added a new version with side covers.
Stolní stojánek pro radiostanici Quansheng UV-K5, díky velké základně je velmi stabilní i s použitím delších antén. Pokud chcete extra stabilitu, vsypte do infilu písek, sůl nebo jinou zátěž. Realy stable base for Quansheng UV-K5.
Perfect fit with no rattle car mount for your Quansheng UV K5/6/ Plus radio on the passenger side ( in my case a Volvo S60 2006) Locks in nicely with a satisfying click with no shaking or rattle while driving. Use double sided foam sticky…
A simple stand for the HAK5 WiFi Pineapple Pager with unobstructed airflow for ventilation holes and full access to the USB C port. No supports needed. Low tolerance fit for the best performance!
These bushings have been designed to enhance the shifting feel of VW manual transmission vehicles, allowing for more precise and crispier feeling shifts. This is a remix of Alberhasky_Designs ( Volkswagen MK7 GTI Shifter Bushings ) I have…
It is an improved version of the GEPRC MARK5. This model is less heavy than the original, more cushioned at the front. It allows to tighten the lower screws and not to create the puffy effect. Tolerances may vary depending on the printer.…
A kickstand that replaces the OEM clip for the pager so that it sits nicely on a desk at a ~45deg angle Modeled using the available references models: https://www.printables.com/model/1487918-hak5-pineapple-pager-reference-model
Halo 5 Helmet I think, its a recon version??? but I'm not sure! Found on the internet as a PDO. Good luck Masterchief24 ; ) PS I've broken it down using a new approach ; ) Looks great don't you think? Will still need slicing further to…
This mount is designed to securely position a BZ-251 GPS on the front of the Mark 5 FPV frame. It offers an optimal GPS placement, provided you are not using an action camera . The front of the mount fits snugly against the connector to…
Plastic gear in the locking mechanism replacement. Vag group, vw, seat, Skoda. Supports used only on button, touching build plate only. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.2…
This is my first pass at a design for the mark five HEAVEN vessel battle-wagon from the Bobiverse series of books by Dennis E. Taylor. I've included details for every key feature I could remember being mentioned but I might change or…
This is mostly another "can it be done?" print with limited utility, but perhaps someone else can use it, so no harm putting it out there. As the print name shows, these are key caps for a Logitech K520 keyboard. Unfortunately there is…
A combination of a couple of different models: Longer LK4 / Diggro 3 Direct Drive Remix by ultrastickman Blowie Mk1 | custom cooling for |Alfawise U30 & U20|Longer lk4 pro| by DonJon99 Blowie Mk2 | Custom Fan Duct for Alfawise U30 & U20 |…
Fixed up some of the spacing that caused some of the walls to be printed and not joined correctly. Also reduced the height by about 5mm so that you can fit it onto the quad with the protective sponge parts. Print Settings Printer Brand:…
Multi-Color version: https://www.printables.com/cs/model/232542-ford-mondeo-fusion-mk5-keychain-multi-color Buy me a coffee: https://ko-fi.com/jokereuc
a nice way to mount the XT60 and VTx antenna on to your GepRC MK5 FPV Frame the XT60 is angled to also accept 5.1" props and you might have to solder the XT60 cable at an angle to accommodate a VTx, etc. like me Print upside down
UPDATE 01.04.2024: Added Antenna dapter for original K5 antenna and ABBREE folding antenna. I play around with my Quansheng way to much, including constantly changing antenna, doing measurements and so on, SMA connector is not meant to be…
As i didn't like any available BLtouch brackets for the Longer LK5 Pro Dual Fan kit, i designed my own. I added an optional "Shield" to block the light of the led if you use a camera in front of the printer. Keep in mind that if you want…
Technics SL-1200 dust covers are hard to come by, but Reloop has one that almost fits, the hinge mounts will not work on a Technics. This is a hinge adapter that will work with an SL-1200 MK5. It may work for other SL-1200 versions, but I…
Want to make your own add-on, pager holster, stand or anything else for the Hak5 WiFi Pineapple Pager? We'd love to see it! To help with that, here are reference CAD files - in STL and multi-part STEP!
An unofficial “tactical” printable case for the Hak5 WiFi Pineapple Mark 7, which adds mount points for straps to attach to a bag. This is the third iteration of the case, with increased printability, space for the MK7AC USB module, and…
I'm running klipper on my MK3s, and I needed a way to mount the ADXL345 accelerometer to the bed to do resonance tuning with the sensor. It requires heated inserts for M3 screws. I included the a STEP file so you can adapt it for your…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
I made this adapter to replace the unused ash tray with a USB/AUX cable (paid link) so I could connect and charge my phone. I used it for a 1990 Chevy Blazer, but I believe it should fit Chevrolet and GMC trucks from 1973-1987 as well as…
update : I have included a pdf in the files to show assembly with renders to help make building this a bit more smooth. Some parts may have changed since I started putting this together. All uploaded parts are the most recent. Recreator…
This is my first 3d model ever. I have several desktop dac/amps that I printed mounts for, but the Fosi k5 I use for gaming was not being shown any love. I used #6-¾" construction/wood screws to mount it to my desk. The front stops behind…
FMS FCX24 Chevrolet K5 Blazer bottom protector. Works with my FPV camera mount . Needs 8 small screws to mount (make sure they don't stick from other side because they can scratch steering servo). You need to print: 1 Left protector 1…
GEPRC mark 5 o4 Pro camera mount. Designed like the original. It is thinner, so the camera moves freely. Eliminates the jello effect. Printed in TPU 95A with 10%-20% infill.
LONGER LK4 Pro / LONGER LK5 Pro / Alfawise U30 Pro touch screen display cover to protect it from dust when printer is not used. Remixed from https://www.thingiverse.com/thing:4603493 Use a M3 55mm screw for the door pin Print Settings…
Remix. changes attachment point to the 2 screws that hold the fan cover on. I don't use the cover as I feel its a bit quieter without it. w. Flat side down. I am using a spider hot end and cheapo dual gear extruder. EDIT: moved model so…
a holder to mount the board under a shelf you need 4 screws 3.5 x 12/16 mm
Geprc / Phisital mark5 dji o4 Pro antenna mount TPU. Printed in TPU 95A.
Stable Base for Quansheng radio UV-K5 & UV-K6 - V1 New Version: https://www.printables.com/it/model/695481-stable-base-quansheng-radio-uv-k5-uv-k6-v2 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4…
This is a small skadis mount for the Quansheng UV-K58.
Two files - The ‘extended’ version has a longer stem that seems to get a better grip on the pot. If you like this model, please consider supporting me: Buy me a coffee.
*** WARNING - This model is complicated and requires soldering, lots of melt-in threaded inserts, and much more. It risks bricking your printer if you make a mistake. It is also a Beta release, and as a result, is under-developed and…
Idk if this works with any other keyboards
Geprc mark5 o4 Pro antenna mount. Printed in TPU 95A.
This is a working project, updates to come as done. This is a rebuild of MK50 from scratch based on the design from Punished Props the original can be found here , I tried to use the EL paper but each time it would only light up a part…
The front TPU bumper on the Mark5 often gets excessively compressed to ensure a tight fit against the frame, a practice that's always concerned me. To address this, I've developed a variant of the bumper that includes printable spacers. I…
Geprc Mark5 O3 + GPS MODULE for GOKU GM10 MINI V3 W/COMPASS
Simple adapter for connecting the Kreg K5 Pocket hole Jig to a Festool dust collection 27mm hose. May work with new jigs from Kreg. If so please post your findings. Printed using PETG but PLA would also work. .2mm layer height. No supports.
I made the original Model flat so you can give it plain on the Printbed and put your own stuff on it. I simply edited with tinkercad and engraved the patterns with 0.1 and then colored it in bambu slicer. I included my Models if someone…
This is my custom design bracket oriented in minimal weight without losing too much rigidity for the MGN12H Linear Rail upgrade on LK5 PRO 3D printer. Additionally, you will need: Heat Bed bracket https://bit.ly/HeatBedBracketLK5 2x MGN12…
Latest iteration of the FPV Tiny trak rover. Uses Lego tracks and the pimironi 50:1 geared micro motors Gearmotors are held in with M1.6x4 mm cheesehead screws and electronic tray is held down with Mx8mm Cap head screws Print instructions…
