BN220 GPS mount for GEPRC Mark5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BN220 mount for the GEPRC Mark5 with support for the Crossfire Immortal T antenna and an MMCX VTX antenna
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 1,027
- Makes
- 3
- Views
- 3,526
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
BN220 GPS mount for GEPRC Mark5
Allows the BN220 GPS module to be mounted on a GEPRC Mark5 with the TBS Crossfire configuration. Besides the BN220, it also houses the VTX antenna and the Immortal Crossfire T antenna. The VTX antenna and the GPS module can, and should be secured with cable ties.
Based on the model from Epic3DPrinting and other similar models, but completely redesigned from scratch. STEP model has been included for any modifications.
Print settings
Should be printed in TPU to allow for the antennas to be inserted. Tested it with 95A and works perfectly. It requires supports as shown in the attached picture, and I've had a great deal of success with organic (tree) supports.