1 / 2
Hak5 WiFi Pineapple MK7 "Tactical" Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An unofficial printable case for the Hak5 WiFi Pineapple Mark 7 which adds mounts for straps.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 228
- Makes
- 4
- Views
- 1,637
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
An unofficial “tactical” printable case for the Hak5 WiFi Pineapple Mark 7, which adds mount points for straps to attach to a bag.
This is the third iteration of the case, with increased printability, space for the MK7AC USB module, and flush-mount bolts.
In addition to the case, you will need:
- 4x M5x8mm bolts
These are used to hold the top and bottom of the case together. Black oxide is usually a nice finish.
- 4x M5 nuts
These are used to hold the top and bottom of the case together, and are hidden inside the countersinks. Finish doesn't matter much.
- 4x M3x6mm bolts
These are used to hold the MK7 PCB inside the case. Finish doesn't matter.
- 4x M3 nuts
These are used to hold the MK7 PCB and fit inside the countersinks on the bottom of the case.
For extra fun, print it out of a transparent/translucent filament with hex infill.