Reversible Lens Hood for Canon EF 75-300mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reversible lens hood for Canon EF 75-300mm f/4-5.6 non-IS lens, suited for APS-C cameras.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The STEP file looks low-poly because of artifacts in Printables' 3D model viewer. The real file is unaffected.
Compatability:
Intended for the Canon EF 75-300mm non-IS lens and APS-C cameras.
Suitable for the Canon REBEL series, XXD series (77D, 80D, etc.), XD (7D, etc.) APS-C cameras, or newer R-series APS-C cameras.
This lens hood is specifically made for cameras with an APS-C 1.6x crop.
The lens hood is reversible for packaging and compact carry.
Print settings used:
I liked making these look visually pleasing (except for where I put the seam. RIP), so these settings may be a little overkill, but here's what I used:
PLA Pro or PLA +
0.16mm Layer Height
0.4mm nozzle
60mm/s outer walls
120mm/s inner walls
5mm outer brim
10 walls, concentric. 100% concentric infill
No supports