1 / 3
Reversible Lens Hood for Canon EF 75-300mm — zdjęcie 1
1 / 3

Reversible Lens Hood for Canon EF 75-300mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A reversible lens hood for Canon EF 75-300mm f/4-5.6 non-IS lens, suited for APS-C cameras.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The STEP file looks low-poly because of artifacts in Printables' 3D model viewer. The real file is unaffected.

Compatability:

Intended for the Canon EF 75-300mm non-IS lens and APS-C cameras.

Suitable for the Canon REBEL series, XXD series (77D, 80D, etc.), XD (7D, etc.) APS-C cameras, or newer R-series APS-C cameras.
This lens hood is specifically made for cameras with an APS-C 1.6x crop.

The lens hood is reversible for packaging and compact carry.

Print settings used:

I liked making these look visually pleasing (except for where I put the seam. RIP), so these settings may be a little overkill, but here's what I used:

  • PLA Pro or PLA +

  • 0.16mm Layer Height

  • 0.4mm nozzle

  • 60mm/s outer walls

  • 120mm/s inner walls

  • 5mm outer brim

  • 10 walls, concentric. 100% concentric infill

  • No supports

Tagi