Chelsio T520-CR 40 mm Fan Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a 40 mm fan directly above the Chelsio T520-CR heatsink
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This mount adds a 40 mm cooling fan above the heatsink of a Chelsio T520-CR network card. It clips underneath the heatsink base
I used a Bambu Lab A1 with a 0.4 mm nozzle with the following settings:
Material: PETG
Wall loops: 4
Top / bottom layers: 4 / 4
Infill: 100%
Wall generator: Arachne
Supports: Local supports beneath the two retaining hooks
Pint the flat fan mounting face on the bed, with the clips and side guides pointing upward. This keeps the main spring arms in the layer plane.
Paint supports only beneath the two retaining-hook ledges. Allow supports to start on the model where required, and keep the spring-arm slots clear. The side guides do not require supports in this orientation.