Counting matching models…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3
Overview I had downloaded and printed some of the switches for brio as my son has several powered trains that need a guide. The issue with those is that the stick that comes out of the side blocks cars or ships on his playset and there…
A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Always wanted a nice custom lube station to go with your premium mechanical keyboard? No money for the next GMK group buy? Why not brighten up your lubing chores with a lube rectangle you can really call your own. Or just showcase your…
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
A mix with octopus and sonic , print with painted support only under the hair
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
Overview Building on a previous design (Brio - Mechanical (Geared) Interchange/Switch - M1 Track) https://www.prusaprinters.org/prints/59955-brio-mechanical-geared-interchangeswitch-m1-track I wanted to see if I could shrink the design…
Platonic solids, a classic. It includes an exhibitor with their names. You can print it in Catalan (Base_40_cat), Spanish (Base_40_es) or English (base_40_en). Combine your favorite colors. New: Also see this new version with a circular…
Double-sided mechanical curved switching track compatible with BRIO and IKEA wooden rails. Printable in place without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini…
Double-sided mechanical curved switching track compatible with BRIO and IKEA wooden rails. Printable in place without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini…
Hello everyone, there are several nice models for lego technic inspired clocks based on the old 24 teeth x187 gear. I found these: https://cults3d.com/de/modell-3d/haus/horloge-clock-lego-technic-gear-engrenage…
Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…
Just a fun little fidget that just requires a mechanical switch and a keycap. Had a lot of fun making it and it is now a permanent part of my desk. Thanks for checking it out, and happy printing :)
Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.
This is one of my original BJD models. Body proportions are realistic, STL has all the parts in the best possible placement, I recommend to keep all the part oriented that way. I made eye socket frame that can be printed and eyes are…
toto je typ vozu, který spolu s lodí Titanic 15.4.1912 skončil na dně moře materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru Pro přesné slepení dílů použij montážní otvory 1,8mm a kousky filamentu Další podobné…
Introducing the nic.box! I got tired of have the hauling around he tins so decided to come up with something a little more front pocket friendly. Features: Holds full can of a variety of different brands/sized of nicotine pouches. (Tested…
It's a polygon heart with organic support as decoration. You can create your own organic-style supports in PrusaSlicer or other slicer software. Here are my support settings: Unfortunately, it is not possible to print it without infill,…
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
Aeroponics is a relatively unexplored grow method that has the potential to solve a lot of the worlds issues. This design is for people who want to “supercharge” their growing while using up to 90% less water compared to conventional…
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
An under-desk drawer with a rail that can be mounted under your desk with screws or adhesives. There are 6 holes with a diameter of 5 mm on the rail part for screws, or you can use adhesives if you prefer. The drawer body may need some…
The Creality Sonic Pad comes with 2 kickstand style feet to set it on a desk, but no other mounting solution. I have an abundance of GoPro parts, so I designed a mount which will retain the kickstand style functionality, but also give the…
Die Station wurde in Pla auf dem Prusa MK4S gedruckt. Andere Filamente wie PETG und ABS funktionieren natürlich auch. Die Anti-rutsch Unterlagen sind in TPU gedruckt. Verwendet wurde eine Schichthöhe von 0.25mm, 15% Infill und…
This simple model demonstrates how to count using gears. Every time the unit wheel makes a revolution, the tenths wheel advances one position. And every time the tenths wheel makes a revolution, the hundredths wheel advances one position.…
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
A compact 74 x 23 mm snus/ZYN-style container with a main bottom compartment, a top disposal compartment, and a separate disposal lid. The model is designed to be simple to print, assemble, and use. No supports or brim are required under…
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
Printed the top part without bottom or top layers to create holes for heat dissipation. Warning! Uses heat inserts to screw top in. Parts needed: 4x m3 screws 4x m3 heat inserts
Cursed Unicorn – The Shadowhorn Model of the Cursed Unicorn Skull with Stand Collection: Fantastic Skull Collection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Yes (Includes three pre-sliced files at…
This model comes from the ashtray of the main character, "Tara" in the Webtoon comics "Letters on the Wall" . It can be used as an ashtray, to store objects or simply as a decoration. Este modelo proviene del cenicero del personaje…
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Hobo Nickle Coaster : Samurai Skull Based on an image found on the internet. (not my design)
2inch Net cup for Hydroponics systems, non-stackable, print as needed. RECOMMEND PRINTING WITH PAINT ON SUPPORTS FOR LIP ONLY For use with Rockwool, not tested with clay.
Platonic solids. New version of the model: https://www.printables.com/es/model/262307-platonic-solids , with a circular exhibitor, designed to be printed also on the Prusa Mini. You can print it in Catalan (Base_cat), Spanish (Base_es) or…
A gridfinity charger for your Sonicare Toothbrush.
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
A minimalistic hat for your sonicare toothbrush so it doesn't scratch or poke your washbag. Printed with a 0.4 nozzle.
Hobo Nickle Coaster Get a bunch of history related posts in my Facebook feed. A very nice black and white photo of this hobo nickel showed up, so I decided to upscale it and run it through the zoetileddepth. The hobo nickel is a…
I was inspired by Matt Parker's recent video ( https://youtu.be/oTWeuyDMgwo ) on compound platonic solid, and wanted to print a 5-cube compound platonic solid myself. I unfortunately could not find a good-quality 3d model of it, and…
The model is a 3D scan of the Allianz Arena in Munich created by jeahjeah on Thingiverse. I repaired the 3D model to be able to print it.
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
Coin with engraved dragon unicorn symbol. Uses art from PublicDomainVectors.org .
Este modelo representa a un tierno Pulpo Dumbo , una especie real de aguas profundas conocida por sus aletas que recuerdan a las orejas de un elefante. El diseño fue creado en colaboración con Tripo3D AI , cuidando cada detalle para…
I noticed user Bethaney Call had mentioned in the comments that at some point in the past there was a planting module without diffuser sieve. As I figure plants with longer roots may get entangled in the sieve, I wanted to have a separate…
A place to hang your picnic tap inside your fridge.
This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…
V1 Hoonicorn with some decals. Do not scale down or you won't be able to tell there are words, scale up for better visibility of the words as well. This is as big as my printer will allow me. **Make sure to adjust your thickness. It…
Inicial del nombre en grande. Tamaño 17cm de alto x 14 de ancho. Nombre completo insertado en la inicial. Tamaño 12 de ancho x 5 de alto. Impreso en PLA sin necesidad de soportes ni impresoras de color. Impreso en mi ender 3. Initial of…
Travel box for Phillips Sonicare plus two Curaprox inter-dental brushes and TePe flosser. Box is held together by a set of magnets 9x4.5x1.6mm glued in place. Joints are locked by two stainless steel pins 30mm x diameter 3mm (real…
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
Inspired by the iconic Hoonicorn build and American Racing VF503 design, these rims are a stylish upgrade for your Mini-Z. They print cleanly with a standard 0.4mm nozzle—just be sure to enable supports. For best results, I recommend…
Silhouette model of Ken Block's hoonicorn. Scale as you please.
You need 12V DC 5RPM motor https://www.amazon.de/gp/product/B0752T2WHC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 PWM speed controller…
100x160mm sign, with “Don't Panic” in large friendly letters, and the alien icon dude from the covers of the “Hitchhiker's Guide to the Galaxy” books. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox…
Hi Im trying to model things in solidworks and this is one of my first atempts
Description This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model SpongeBob driving a boulder! Inspired by the…
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
Aeroponics is a relatively unexplored grow method that has the potential to solve a lot of the worlds issues. This design is for people who want to “supercharge” their growing while using up to 90% less water compared to conventional…
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
I spent a lot of time looking for the perfect display stand for my favorite coins in my collection. In the end, I decided to design my own. I went with a design inspired by the style of Ionic columns, which gives the stand a classic and…
A wall mounted version of the Hoonicorn V2 (after twin turbos). You can scale as you like with this one. Can be made as thick or thin as you like. I typically use 2 or 3 mm depending on location of mounting. The last picture shows V1 and…
A conic is a curve obtained from a cone's surface intersecting a plane. This cone shows them all.
I designed this camera cage for my Panasonic HCV-757 and 777 camcorders, as there are no models of cages available with this formfactor. To design the cage I remodeled the camcorder and built the cage as tightly as possible around it.…
Regalhalter für Holzbretter, sehr stabil und im Design ansprechend. Versteckte verschraubung für 3-3,5mm Schraubendurchmesser. Shelf holder for wooden shelves, very sturdy and attractive in design. Hidden screw connection for 3-3.5mm…
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
Based on https://www.thingiverse.com/thing:5190793/files This is a generic cover for Nice! Nano v2.
A fridge magnet featuring the warm friendly words from "The Hitchhikers Guide To The Galaxy".
Carrier for the electronics used in a lightsaber. This is a model for those who are constructing their own saber and need an easy electronics pack to slide into the body of the saber. You need a slot diameter of 30mm with a minimum lenght…
-8h di stampa -PLA -Misure standard
Inicial del nombre en grande. Tamaño 18cm de alto x 16 de ancho. Nombre completo insertado en la inicial. Tamaño 12 de ancho x 5 de alto. Impreso en PLA sin necesidad de soportes ni impresoras de color. Impreso en mi ender 3. Initial of…
World Taekwondo logo with organic How about buy me a coffee buymeacoffee.com/spank7
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
procvičte si prstíky při výměně filamentu. jednoduchý tisk který ne každá tiskárna a filament zvládne :/ *** practice your fingers when changing the filament. simple printing that not every printer and filament can handle :/
Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…
Printed from PLA+ and PLA Silk. Fill 100% When printing letters, use max. speed. 25mm/s Black filament: PLA+ Gembird Gold filament: PLA Silk Spectrum As a wall mount, I recommend:…
I made some coasters of different floor designs from the RMS Titanic. this one is from 1st class smoke room. Update V2: Parts without inner rim, for MMU printing use parts interlocking
I use the HC-SR04 sensor to measure the distance of a person approaching to turn on or off the light with Home Assistant automation. I use the D1 Mini board.
The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).
Toothbrush stand / holder for 1 Phillips Sonicare Recommended to print from PETG (doesn't hate water that much..) Used default slicer settings, no need to modify anything. It can lay flat, or you can add generic silicone feet (from any…
NOTE: In order to use this electronics case, you'll have to have mounted your Ender 5's original electronics enclosure to the rear or your machine or otherwise relocated its contents into a custom solution. For those interested, something…
Don't forgot to add M601 pause around 3 mm and color change for the logo!
It's a ring I made a while back, I print it for my friends and family as gifts, or for some special events. You can also set it to change colors (by swapping the PLA during the print) for it to have the cool 2 color effect. I made the…
kaskáda trsátek na kytaru uchycená do jednoho kroužku / a cascade of guitar picks attached to one ring
Hier findet ihr einen Lustigen Anhänger für euren Rucksack, Er kann an ein Gurtband oder ans Molle System befestigt werden. Es sind STL in deutsch, englisch oder auch ohne Beschriftung vorhanden.
My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.
EN : A request in the comments section prompted me to revisit this idea with two brush attachments. So I modifyed my former model ( see ). Thanks to the user for the reminder. Material : PLA Layers : 0.2 mm Supports : none See also model…
Case for two scissors and a nail file or two on each other. A simple box with an inclined guide. Printed on Mk3s+ with 0.6 nozzle and 0.4 layer height. The material I used was PLA.
I made some coasters of different floor designs from the RMS Titanic. this one is from 1st class dining saloon.
Samsung Galaxy A32 kryt na telefon s logem Mini Cooper. Kryt byl vytištěn z PLA na karbonové podložce s následujícími parametry: Materiál: PLA (Silver, White) Tiskárna: Ender 3 V2 neo Výška vrstvy: 0,2 mm Infill: 15% Rychlost tisku: 50-…
Wydrukowałem pionowo z podporami
This brush rest Is based off the ionic style columns of ancient Greece that you would have learned about in art history. the brush rest is designed to fit 3 brushes and your water container for cleaning them when you switch your paint…
