Shelf bracket set for 15 to 30 cm deep shelves, braced, no supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
8 braced shelf brackets for shelves 150 to 300 mm deep, 20 and 30 mm wide. They print on their side without supports.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
8 shelf brackets with a diagonal brace for shelf depths of 150, 200, 250 and 300 mm, each 20 and 30 mm wide, for 18 mm shelves. Fixed with two 5 mm wood screws to the wall (the upper one through an access hole in the brace) and one 4 mm screw into the shelf from below. The 250 and 300 mm brackets need a print bed of at least 260 or 310 mm; the table lists the size per file.
Printing: lying on its side, as in the file. At least 3 walls, 20 % infill, PLA.
The table gives a rough load per bracket for an evenly spread load (brace in compression and buckling, leg in bending, safety factor 3). Screws, wall plugs and the wall are not included. Not a guarantee.
A table of all sizes is in the pictures. Need a size that is not included? All files come from a free browser generator: https://timobritz.de/en/3d-druck/regaltraeger/
The first picture and the last ones are photos of my own prints. The others are AI-generated and show the parts as examples. The files and the table are what counts.