Shelf bracket set for 15 to 30 cm deep shelves, braced, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8 braced shelf brackets for shelves 150 to 300 mm deep, 20 and 30 mm wide. They print on their side without supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
8 shelf brackets with a diagonal brace for shelf depths of 150, 200, 250 and 300 mm, each 20 and 30 mm wide, for 18 mm shelves. Fixed with two 5 mm wood screws to the wall (the upper one through an access hole in the brace) and one 4 mm screw into the shelf from below. The 250 and 300 mm brackets need a print bed of at least 260 or 310 mm; the table lists the size per file.
Printing: lying on its side, as in the file. At least 3 walls, 20 % infill, PLA.
The table gives a rough load per bracket for an evenly spread load (brace in compression and buckling, leg in bending, safety factor 3). Screws, wall plugs and the wall are not included. Not a guarantee.
A table of all sizes is in the pictures. Need a size that is not included? All files come from a free browser generator: https://timobritz.de/en/3d-druck/regaltraeger/
The first picture and the last ones are photos of my own prints. The others are AI-generated and show the parts as examples. The files and the table are what counts.