Versatile mATX PC Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A versatile PC Rack for mATX/ITX Motherboards with ATX PSU - it can be positioned flat or vertically!
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 53
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Purpose
I designed this rack as a cheap solution to test my components but I have found it held up so well I am using it semi-permanently for one of my PCs!
Print Settings
I recommend printing in PETG or PETG ESD, standard settings are fine but I used gyroid infill.
Screws Required
It is designed to bolt together with:
15x M3x12mm and,
10x M3x16mm screws
Alternatively you can just use 25x M3x16mm only
Note you could substitute for other lengths but just make sure there is enough threads engaging for strength
You might also need:
4x PSU bolts and,
4-8x bolts to fasten the mobo to the frame and,
1-4x bolts for PCIe cards or GPU
Mechanical Keyboard Switch Power Button
I have included a small attachment to fit a mechanical keyboard switch if you wish to use it
There is a power button keycap with translucent PETG power logo to allow light through the keycap
You can add 2x 5mm LEDs to the switch holder and wire it to your mobo
Warning! Do not overtighten screws.