Official OpenCreator Flashforge Creator 5 Leveling tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple tool for adjusting the bed tilt screws
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed something to help use screws_tilt_calulate on OpenCreator and this is what came out of it. If you like the texture you'll need to use the 3mf or use the following setting in a compatible slicer.
Layer height - 0.2mm (this is important for using my fuzzy skin settings)
Fuzzy skin
Fuzzy skin - Contour
generator mode - Displacement
noise type - Ripple
Point Distance - 0.3
Skin Thickness - 0.3
Number of ripples per layer - 40
Ripple offset - 50
Layers between ripple offset - 4
Apply to first layer - disabled
Add a height modifier for 10.3-20 mm
Set Fuzzy skin to Disabled for this modifier