Light-Up Christmas Tree for LED Fairy Lights – Leuchtender Tannenbaum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A glowing Christmas tree for your windowsill: fill it with a battery LED fairy light and let it shine.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 36
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🎄 English below – Deutsch weiter unten 🎄
A little tree full of light
This tree started with a question. I once came across a ceramic tree in exactly this shape. It wasn't lit – it was simply standing there – but I couldn't stop wondering how it would look glowing softly from the inside. Thanks to Blender and my 3D printer, I could finally find out.
Fill it with one of those thin battery-powered LED fairy lights, click the lid on, and you have a warm, gently glowing tree for the windowsill, the dining table, or the shelf.
Three versions – pick what suits your fairy light
The tree looks the same in all three versions. They only differ in where the battery box goes:
Cable at the back—the battery box stays outside and the cable enters at the back, nicely out of sight - my favorite.
Cable at the side – the same, with the cable entering at the narrow side.
Box in the base – the battery box hides inside the foot of the tree. The neatest look, but depending on your fairy light the cable can be a bit fiddly to fit in and the tree may not stand perfectly on the box. The compartment is 78 × 33 × 18 mm inside – that fits most 2× AA battery boxes I tested, with a little room to spare. Please measure yours before printing.
The cable holes are about 4 mm wide. If your cable or plug is thicker, you can easily enlarge them in the slicer: add a cylinder as a negative volume at the hole.
What you need
A thin battery-powered LED fairy light, e.g. this one with a timer: https://link.amazon/B09Zf0Drs (affiliate link)
Any similar micro LED fairy light will work, as long as the wire is thin and the battery box fits your chosen version.
As an Amazon Associate I earn from qualifying purchases. It costs you nothing extra and helps me keep designing new models. 🧡
Putting it together
Carefully pull the fairy light into the tree.
Wind it gently along the inside of the shape so the LEDs are spread evenly.
Click the lid in place.
Stand it up, switch it on – and enjoy. ✨
Printing
The tree and its lid are on one plate and printed without supports.
Layer height: 0.15 mm – this gives the best fit for the click-on lid
Walls: 2
Bottom layers: 4
Infill: 15 %
Material: I used plain white PETG, PLA works just as well. The walls are thin, so the light shines through nicely – just avoid filaments with plenty of pigments.
Tree and lid (cable at the back): approx. 2 h 28 min and 33 g on my Prusa MK4S (0.15 mm structural profile)
The battery base looks cleaner when printed with supports.
Size: approx. 12 × 14 cm, 2.2 cm deep (trees without the box) .
Please use LED fairy lights only – they stay cool. Never use real candles or hot bulbs inside a 3D print.
More Christmas lights are on their way – little houses and more trees to build your own glowing winter village. I'd love to see your tree on your windowsill, so please share a make! 🧡
---
Ein kleiner Baum voller Licht
Am Anfang dieses Baums stand eine Frage. Ich habe einmal eine Keramik-Tanne in genau dieser Form gesehen. Sie war nicht beleuchtet – sie stand einfach nur da –, aber ich musste immer wieder daran denken, wie sie wohl von innen leuchtend aussehen würde. Dank Blender und 3D-Drucker konnte ich es endlich ausprobieren.
Eine dünne LED-Lichterkette mit Batterie hineinlegen, Deckel einklicken, fertig: eine warm leuchtende Tanne für die Fensterbank, inmitten der Weihnachtsdeko oder fürs Regal.
Drei Varianten – je nach Lichterkette
Der Baum sieht bei allen drei Varianten gleich aus. Sie unterscheiden sich nur darin, wo das Batteriekästchen sitzt:
Kabel hinten – das Kästchen bleibt draußen, das Kabel geht unauffällig an der Rückseite hinein -mein Favorit!!!
Kabel seitlich – genauso, nur kommt das Kabel an der schmalen Seite hinein.
Batteriekästchen im Fuß – es verschwindet ganz im Sockel. So sieht es am aufgeräumtesten aus, je nach Lichterkette ist es aber etwas Fummelei, das Kabel unterzubringen. Und auch die Tanne steht manchmal nicht perfekt drauf, weil das Kabel sie nach oben drückt. Das Fach ist innen 78 × 33 × 18 mm groß – da passten alle 2× AA-Batteriekästchen, die ich getestet habe, mit etwas Spiel. Miss deins am besten vor dem Drucken nach.
Die Kabellöcher haben etwa 4 mm Durchmesser. Ist dein Kabel oder Stecker dicker, kannst du sie im Slicer ganz einfach vergrößern: einen Zylinder als negatives Volumen an das Loch setzen.
Was du brauchst
Eine dünne LED-Lichterkette mit Batterie, z. B. diese mit Timer: https://link.amazon/B09Zf0Drs (Affiliate-Link)
Jede ähnliche Micro-LED-Lichterkette funktioniert auch, solange der Draht dünn ist und das Batteriekästchen zu deiner Variante passt.
Als Amazon-Partner verdiene ich an qualifizierten Verkäufen. Für dich ändert sich am Preis nichts – du unterstützt damit aber neue Modelle. 🧡
Zusammenbauen
Die Lichterkette vorsichtig in den Baum ziehen.
Sie behutsam an der Innenseite entlang wickeln, damit sich die Lichter gleichmäßig verteilen.
Den Deckel einklicken.
Aufstellen, einschalten – und genießen. ✨
Baum und Deckel liegen zusammen auf einer Platte und brauchen keine Stützen.
Schichthöhe: 0,15 mm – so klickt der Deckel am besten ein
Wände: 2
Bodenschichten: 4
Infill: 15 %
Material: Ich habe einfaches weißes PETG genommen, PLA geht genauso. Die Wände sind dünn, das Licht scheint schön durch – nur Filament mit sehr vielen Farbpigmenten solltest du meiden.
Baum und Deckel (Kabel hinten): ca. 2 h 28 min und 33 g auf meinem Prusa MK4S (Profil 0,15 mm Structural)
Der Batteriesockel wird mit Stützen sauberer.
Größe: ca. 12 × 14 cm, 2,2 cm tief.
Bitte nur LED-Lichterketten verwenden – sie werden nicht heiß. Niemals echte Kerzen oder heiße Glühbirnen in einem 3D-Druck benutzen.
Weitere Weihnachtslichter sind schon unterwegs – kleine Häuser und noch mehr Bäume für dein eigenes leuchtendes Winterdorf. Ich freue mich riesig über Fotos von deinem Baum auf der Fensterbank! 🧡
