2KG spool holder no gap with support leg for Core One and Core One L
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had to print a 2kg spool on Core One L
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
I had to print 2kg spool on the Core One L and I decided to remix two models into a one set.
The set has 3 models in total, and you probably just want to print two of them depending on the printer you have:
2kg no gap spool holder
2kg Spool support Core One L
2kg Spool support Core One (non-L)
Please like, create makes and add comments also to the original model, thanks!
Changelog
2026.10.25 - initial release after about 2 iterations
provided gcode is just for time and material estimations - it contains custom wipe and parking position.
3mf file shows how to print it, it contains all the models, so remove the one that is not needed
0.2mm PETG 0.4 nozzle, stock structural profile, maybe bump it to 3 perimeters
no brim, no supports, no skirt, print in the vertical position as on the images
Assembly
remove the original spool holder, move the rubber oring to the new part and screw it into the place
optionally use spool support on the side, so it does not wobble that much.