1 / 5
Pattern inlay for Prusa CORE One/+/L Dry Box mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An inlay for the Prusa CORE One/+/L Dry Box mod for those without MMU or INDX.
- Rating
- 4 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 1
- Views
- 53
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This might be considered as a mod. I don’t know. The original looks good. The hex pattern looks good, but some colour makes it look even better in my opinion. But sins I don’t have a MMU or INDX and I didn’t want a flat lid. I made the inlay to make the dry box more colourful.
Print the lid with the hex pattern. The groves is too shallow to make the inlay snap in place so use glue.
The outward facing side faces the build plate. I printed this with a 0,2 mm nozzle and a layer hight of 0,1 mm.
Link to the box: