JX7004 Sound Module / Arduino / esp32 Enclosure. 36mm speaker.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact enclosure for JX7004 sound modules, small Arduino/ESP32 projects, with a 36 mm speaker grille and cable outlet.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Public Domain
JX7004 Sound Module / Arduino / esp32 Electronics Enclosure
A little enclosure for a JX7004 sound module from AliExpress. Just to keep the everything together.
The box has a grille for a 36 mm speaker and a small opening on the side for an external cable. There's also a ring on the inside of the lid to help position the speaker. Although designed with the JX7004 in mind, there's nothing special about the inside. You can also use it for small Arduino boards, ESP32 or similar.
Outside: 84 × 54 × 23.5 mm, Inside: 79 × 49 × 18 mm. Speaker: 36 mm
There are no dedicated mounting points for the circuit board, i used double sided tape. The lid is attached with a small amount of glue.
printed in pla, 15% infill, no supports or brim.
My first model so any feedback is appreciated.