1 / 1
Transforming toolbox! — image 1

Transforming toolbox!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A toolbox with two floors! :D

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
16
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

Transforming toolbox!

Have you ever felt like your toolbox is boring? They are typically just a box with a lid and a latch! However, you can always modify existing things to have a new purpose, or just do something better!

This is why I made the transforming toolbox!

Features

  • 2nd floor!

  • Compact yet useful for the amount of space given

  • Latching mechanism 

This project was really special to me, as since I started CAD, I have always been avoiding using Fusion 360. I have always been using software like Onshape and Tinkercad in my beginning years. Ever since I started becoming a T1 reviewer at Atlantis - a Hack Club program- I had to download Fusion 360 to open files for people's projects. I decided to give Fusion a shot, and ended up with this! 

Assembly!

If you want to make your own transforming toolbox, I highly recommend this as the guide you use:

Materials required

Item

Quantity

3D Printed Parts

1 of each part!

M4 8mm bolt

Buy 1 of attached - 6 needed

Super glue (Or any other adhesive)

1 tube of super glue

Align parts 2, 3, 4, and 5 to the holes of part 1




On the back two holes of part 1, add parts 6, 7, 8, and 9 to attach the parts. You can use the guide on the left of the image to see how it is attached. Once it is attached, use two screws in total of your screws for everything to connect.




Insert the current assembly into part 14, and use parts 15-22 on both sides of the front of the 2nd level tray to make a "closed pivot".



Use parts 23 & 24 and put them through the front holes on part 14 and the tray assembly. This is for the left AND right side.




Use parts 25 and 26 to connect from the outer side to parts 23 and 24. This is where you would use 2 more of the 6 M4 Bolts.




Use parts 27, 28, 29, and 30 to repeat the same step for the inner parts.




Insert part 31 into the back hole in the main base through the rod.




Insert part 32 through the hole at the front of the toolbox, and use adhesive to attach part 33 to it.



Insert parts 34 and 35 through the same style as done in the step earlier. However, the hole is the one present in parts 32 and 33.


And voila! You have assembled your own transforming toolbox!

Future improvements

To make this project better, I think that it would be a major step up if I were able to spend more time on the rendering of this project. The actual model came out good; it's just that the renders that are on the printables page could use some better work.

Tags