1 / 2
Synaptics CoralBoard SL – Magnetic Enclosure with Dual Button Access — image 1
1 / 2

Synaptics CoralBoard SL – Magnetic Enclosure with Dual Button Access

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom 3D printable enclosure designed for the Synaptics Coral Board SL. Features a removable magnetic lid

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Synaptics Coral Board SL – 3D Printable Protective Enclosure

This custom-designed 3D printable enclosure is made specifically for the Synaptics Coral Board SL. It provides a clean, protective housing while allowing access to the board's connections.

The enclosure features a three-piece design consisting of a removable top lid and a bottom housing and button. The Coral Board mounts securely inside using raised mounting posts and screws, while the lid is held in place using embedded magnets for easy access without removing screws.

Features

  • Two-piece design with separate lid and base

  • Magnetic lid closure for easy access

  • Internal mounting posts for securing the Coral Board

  • Openings for board connections

  • Compact design with no external lid screws required

Additional Hardware Required

Magnets

  • 5 mm diameter × 2 mm thick round neodymium magnets 8 of them

  • Used to secure the removable lid to the base

  • Press-fit or a small amount of adhesive may be needed

  • Make sure the magnets are installed with the correct polarity

Mounting Screws

  • M2.5 screws (recommended size)

  • Used to secure the Coral Board to the internal mounting posts

  • Screw length should be selected based on the printed post depth and board thickness

  • Self-tapping screws suitable for plastic are recommended if the posts are not threaded

Printing Recommendations

  • Material: PLA or PETG

  • Layer height: 0.20 mm

  • Wall count: 3–4

  • Infill: 15–20%

  • Print the lid and base separately and buttons

  • Supports: As needed, depending on orientation

Assembly

  1. Print the top lid and bottom housing.

  2. Install the magnets into their designated recesses, checking polarity before gluing.

  3. Position the Coral Board onto the internal mounting posts.

  4. Secure the board using appropriately sized M2.5 screws.

  5. Align the lid and allow the magnets to hold it in place.

Important: The Coral Board, magnets, and mounting screws are not included with the printed parts. This download contains the printable enclosure components only. thank you and God bless

P.s the idea for magnets is easy change for any way your running need more hookups that can be made and used on the same case ect.

Tags