Synaptics CoralBoard SL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Give your Synaptics CoralBoard SL a retro feel with this custom 3D-printable enclosure
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Features
Custom-designed enclosure for the Synaptics CoralBoard SL
Two-piece construction with removable lid and base
Four internal mounting points to secure the board
Four screw mounting points to secure the lid
Four magnet pockets on the bottom of the enclosure
Retro-inspired exterior with custom Synaptics CoralBoard SL branding
Designed for FDM 3D printing
Hardware Required
4 × M3 self-tapping screws, 10 mm long — for securing the lid.
4 × M2.5 self-tapping screws, 6 mm long — for securing the chip to the internal mounts.
4 × 6 mm × 2 mm magnets — for the bottom.
Total: 8 screws and 4 magnets.
Screw sizes should be verified against the printed mounting holes before assembly. No threaded inserts are required.
Printing and Assembly
Print the lid and base separately. Secure the CoralBoard SL to the internal mounting posts using four screws, then attach the lid using the remaining four screws.
Install the four magnets into the recessed pockets on the bottom of the enclosure. These allow the case to attach to compatible magnetic surfaces.
For a nostalgic appearance