Decorative Arch 180 mm | Waves & Dunes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple decorative arch on an oval base for shelves, desks and small interior displays.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Decorative Arch 180 mm | Waves & Dunes
Flavora.studio — Waves & Dunes
An arch-shaped ornament on an oval base, intended as a sculptural accent for a desk, shelf or display.
Overall dimensions (X × Y × Z): 178.99 × 96.43 × 180 mm.
Print with the oval base on the build plate. Inspect the inner curve and use supports where needed. Requirements depend on material, orientation and printer. PLA is a starting option for indoor display.
FILES
One STL and one geometry-only 3MF at these dimensions, plus a print guide. The 3MF contains a mesh, without printer-specific profiles or G-code. The mesh was cleaned and passed digital manifold checks.
SUGGESTED STARTING SETTINGS
0.20 mm layers, 3 walls and 15% infill. Inspect the first layer and overhangs; add a brim if needed. These are starting points, not a tested print profile. Physical test printing is pending.
ABOUT
An original AI-assisted Flavora.studio design. The image is a render of the actual mesh, not a photograph of a physical print.
LICENSE
Creative Commons Attribution-NonCommercial 4.0 (CC BY-NC 4.0).