WAVE Drainage Insert 110 mm | Waves & Dunes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wave-pattern insert intended for a soap-dish setup, supplied as a separate model.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
WAVE Drainage Insert 110 mm | Waves & Dunes
Flavora.studio — Waves & Dunes
An open wave-pattern insert intended for a soap-dish setup. Curved ribs create gaps beneath the supported item.
Overall dimensions (X × Y × Z): 110 × 78.18 × 11.68 mm.
Check dimensions against your intended base. Fit with the separate FLOW base and drainage performance have not been tested. Print flat and inspect ribs, gaps and overhangs. Consider PETG for damp surroundings.
FILES
One STL and one geometry-only 3MF at these dimensions, plus a print guide. The 3MF contains a mesh, without printer-specific profiles or G-code. The mesh was cleaned and passed digital manifold checks.
SUGGESTED STARTING SETTINGS
0.20 mm layers, 3 walls and 15% infill. Inspect the first layer and overhangs; add a brim if needed. These are starting points, not a tested print profile. Physical test printing is pending.
ABOUT
An original AI-assisted Flavora.studio design. The image is a render of the actual mesh, not a photograph of a physical print.
LICENSE
Creative Commons Attribution-NonCommercial 4.0 (CC BY-NC 4.0).