1 / 2
IKEA Typ A0402 Lamp E14 Lampshade Holder / Shade Ring Adapter — image 1
1 / 2

IKEA Typ A0402 Lamp E14 Lampshade Holder / Shade Ring Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ikea lamp lampshade holder

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
24
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution

Replacement socket ring / adapter holder specifically designed for the IKEA Typ A0402 lamp with an E14 (small Edison screw) fitting. If your original shade retaining ring broke, went missing, or you are fitting a custom shade onto your lamp base, this model securely locks the lampshade in place.

  • Design Note: I made both parts slightly larger than original nominal dimensions, as 3D printing precise threads can often result in too tight of a fit due to plastic expansion.

  • Purpose: Fixes broken or missing lampshade holder rings for IKEA Typ A0402 table/floor lamps.

  • Socket Compatibility: Standard E14 threads (~28 mm thread diameter).

  • Print Settings Recommendations:

    • Material: PETG or ABS/ASA recommended due to ambient heat from light bulbs (PLA can soften over time; acceptable if using low-wattage LED bulbs only).

    • Wall Loops / Perimeters: 3–4 walls for structural strength along the internal threads.

    • Infill: 30–50% (Gyroid or Grid).

    • Supports: No supports needed when printed flat on the build plate.

Tags