1 / 2
IKEA Typ A0402 Lamp E14 Lampshade Holder / Shade Ring Adapter — zdjęcie 1
1 / 2

IKEA Typ A0402 Lamp E14 Lampshade Holder / Shade Ring Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ikea lamp lampshade holder

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution

Replacement socket ring / adapter holder specifically designed for the IKEA Typ A0402 lamp with an E14 (small Edison screw) fitting. If your original shade retaining ring broke, went missing, or you are fitting a custom shade onto your lamp base, this model securely locks the lampshade in place.

  • Design Note: I made both parts slightly larger than original nominal dimensions, as 3D printing precise threads can often result in too tight of a fit due to plastic expansion.

  • Purpose: Fixes broken or missing lampshade holder rings for IKEA Typ A0402 table/floor lamps.

  • Socket Compatibility: Standard E14 threads (~28 mm thread diameter).

  • Print Settings Recommendations:

    • Material: PETG or ABS/ASA recommended due to ambient heat from light bulbs (PLA can soften over time; acceptable if using low-wattage LED bulbs only).

    • Wall Loops / Perimeters: 3–4 walls for structural strength along the internal threads.

    • Infill: 30–50% (Gyroid or Grid).

    • Supports: No supports needed when printed flat on the build plate.

Tagi