Silvercrest Food Dehydrator SDA 350 A1 replacement blower fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the dehydrator sold by Lidl/Aldi, with some changes for improved strength.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Silvercrest's SDA 350 A1 dehydrator blower fan.
The original model had different dimensions than the one found in my SDA 350 A1. Took the opportunity to do some modifications to hopefully improve strength of the printed part.
Printed in ASA with 0.16 mm layer height and a brim (to avoid warping at the fins) with good results. Not sure what the ambient chamber in the lower compartment of the device is, the chamber side reaches around 60-65; if unable to use ABS/ASA, I would advise for PETG over PLA. If using a brim, 0.14 mm separation gap can help with easy removal.