1 / 10
Prusa XL Nozzle Wiper - brush befor print - Firmware 7.0.0 and higher — image 1
1 / 10

Prusa XL Nozzle Wiper - brush befor print - Firmware 7.0.0 and higher

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

From firmware version 7.0.0 onwards, the printer supports a nozzle wipe before the print begins. No start G-code change

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Prusa XL – Nozzle Wipe Upgrade with Replaceable Wipers

Automatic nozzle cleaning before every print – without modifying the start G-code!

Since firmware version 7.0.0, the Prusa XL has natively supported the Nozzle Wipe function. This allows the nozzle to be cleaned before a print starts without having to modify the start G-code.

I designed a simple mounting system that allows you to use this feature with replaceable cleaning elements. Installation is straightforward and requires removing and reinstalling just one screw on the bed frame.

🛠 Print Settings and Material

  • Material: ABS

  • Perimeters: 5

  • Infill: 40%

Since the part is located very close to the heated bed, I recommend using a material with high heat resistance. That's why I chose ABS for this design.

Important: Please use a material that can withstand the temperatures around the installation area over an extended period.

🧹 Version History

Version 1.0 – Original Brush Design

For the first version, I used two paintbrush-style brushes from Lessmann because I already had them available.

The brush dimensions are:

  • Shank diameter: 3 mm

  • Brush head diameter: 5 mm

One advantage of this design is that the brushes do not need to be glued in place. This makes them quick and easy to replace whenever necessary.

Version 2.0 – Improved Silicone Wiper Design

The design has been further improved!

What's new?

  • Bambu Lab A1 Silicone Wiper: The original brush system has been replaced with the silicone wiper from the Bambu Lab A1. This provides an alternative solution for cleaning the nozzle.

  • Prusa XL Parking Plate: I've added the Parking Plate feature from the original Prusa XL design. It helps prevent unwanted filament oozing after the nozzle wipe while the nozzle cools down.

These improvements make the design more complete and provide a cleaner and more reliable nozzle cleaning process.

🔧 Installation and Setup

Installation is quick and easy:

  1. Loosen the screw on the bed frame.

  2. Position the printed mounting assembly.

  3. Secure it again using the same screw.

  4. Enable Nozzle Wipe in the printer settings.

That's it!

Your Prusa XL will now clean the nozzle before starting a print – without any modifications to the start G-code.

💬 Feedback Welcome!

I hope this upgrade will be just as useful for other Prusa XL owners as it has been for me.

Feel free to give it a try and let me know what you think. Feedback and suggestions for further improvements are always welcome!

Happy printing!

Tags