P
PrintablesJack
Cartridge nozzels
nozzles and cap for caulk, sealant, glue cartridges ( thread ∅15mm p=2.5 )
- Downloads
- 4,359
- Likes
- 2,299
- Rating
- 4.96
Search results: nozzel
Counting matching models…
P
PrintablesDopamine Designs
ELEGOO NEPTUNE 3 PRO/PLUS/MAX DUAL 5015 BLOWER FANS SHROUD W/ 8MM NOZZEL CAM CLAMP
version 2 of my dual 5015 fan upgrade for the elegoo neptune 3 pro plus and max. This model has increased air flow flow over v1. Helps keep the stepper cool by pulling air directly off uses much less support material, prints fater, and…
- Downloads
- 704
- Likes
- 150
- Rating
- 5
P
Printablesdbideas
Filament Spool Dessicant Container ( with .6 nozzel prints in 45min)
If you've printed with any of the hydrophilic filaments like TPU, PETG, or Nylon, you know how critical it is to keep them dry! There are several excellent desiccant bead holders you can download, but I wanted one that printed fast,…
- Downloads
- 244
- Likes
- 29
- Rating
- 4.83
P
PrintablesUrugut
Ender 3 S1 + Pro Nozzelcam
Nozzelcam für einen Ender 3 s1 + Pro
- Downloads
- 205
- Likes
- 49
- Rating
- 0
P
Printables_Storch_
Gridfinity - Qidi Q2 NozzelBox
Zum Aufbewahren und sortieren von Nozzeln.
- Downloads
- 187
- Likes
- 38
- Rating
- 5
P
PrintablesNeme.C
Backlight for custom airflow, ELEGOO NEPTUNE 3 PRO/PLUS/MAX DUAL 5015 BLOWER FANS SHROUD W/ 8MM NOZZEL CAM CLAMP.
4 LEDs 3mm 3volt. A board that lowers the voltage from 24V to 12V is not needed!! A resistor of 560 Ohm or 680 Ohm, 0.25 W is sufficient Power it from the hotend fan connector. It turns on automatically when the temperature exceeds 50…
- Downloads
- 164
- Likes
- 59
- Rating
- 0
P
PrintablesSimonp
Pressure Advance Linien 0.6 Nozzel MK3.5 und Input Shaper Test
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
- Downloads
- 150
- Likes
- 14
- Rating
- 0
P
PrintablesAndreas G
PETG Heat Tower for 0.6mm nozzel
PETG Heat Tower Temperature: 215, 220, 225, 230, 235, 240, 245 & 250 °C Nozzel: 0.6 mm Printer: Prusa MK3S Layerheight: 0,2 mm Material: 8g
- Downloads
- 148
- Likes
- 9
- Rating
- 0
P
Printableskyle plansinis
FF Adv 5M Pro Nozzel Holder
Nozzel holder for the Flashforge Adeventurer 5m/5MPro. If you have the 5M or the 5MPro, you can use the large or small Command Strip mounting plates. If you have the 5MPro, There is an adapter to work with the same hanger for all of my…
- Downloads
- 134
- Likes
- 17
- Rating
- 0
P
Printablesscatty
Gridfinity holder for Nextruder nozzels
A Gridfinity holder for Nextruder nozzels in the plastic casing they are sold in. It holds upt o four nozzels.
- Downloads
- 115
- Likes
- 24
- Rating
- 5
P
Printableskotana
VORON trident nozzel brush (bambu a1 silcon brush)
My printer is small and needs to be attached on the left side, so I reduced the spacing and adjusted the size.
- Downloads
- 104
- Likes
- 8
- Rating
- 5
P
PrintablesLeokaldzik
Your must have | organizer for printer | nozzel holder | storage | tools | pendrive | Desktop organizer
Your must have this!!!! When you print model (USB) set supports. Other models print without The model has space for USB, SD, nozzles, tools and two style compartments. It's easy to print and will definitely tidy up your workspace. It is…
- Downloads
- 96
- Likes
- 30
- Rating
- 0
P
PrintablesMichaelQ
Electrolux / AEG Vacuum Cleaner Slim Nozzel with Release Mechanism
There are some designs available, but not one fitted good enough for me. So I created my own, including a release mechanism, like the original Electrolux parts have. You will need the following to put the model parts together A ballpoint…
- Downloads
- 90
- Likes
- 15
- Rating
- 5
P
Printablesbsprange
Bissel Vacuum Adapter for D shaped nozzel to 32mm or 1 1/4 inch
I was frustrated with not being able to use standard vacuum attachments with my Bissel vacuum since it has a proprietary ‘D’ shaped nozzel. This adapter changes the nozzel to a standard household vacuum nozzel of 32mm or 1 ¼". The…
- Downloads
- 83
- Likes
- 5
- Rating
- 0
P
PrintablesRaul Melnik
Ender 5 Pro Nozzel Clean brush
Modification required before activating nozzle cleaning https://www.thingiverse.com/thing:4410969 That is the part of the code that needs to be replaced G92 E0 G1 X2.0 Y140 E10 F1500 ; prime the nozzle G1 X2.3 Y140 F5000 G92 E0 G1 X2.3…
- Downloads
- 57
- Likes
- 21
- Rating
- 4
P
PrintablesJimbo70
Prusa Original MK2 fan nozzel
This is a modified Original Prusa MK2 fan nozzle shroud. The original fan nozzle did not fit well and also directed too much cooling toward the heated nozzle. This resulted in THERMAL RUNAWAY and lowering of the hot end temperature during…
- Downloads
- 41
- Likes
- 0
- Rating
- 0
P
Printablesplanetar
Laptop Cleaner / Dryer - Miele vaccuum nozzel - Schnussel für Miele Staubsauger
I designed this part specifically to help a Macbook Air cope with the adverse effects of an all too close encounter with a little ginger tea. (But it would serve on other brands just as well.) It fits on the edge of the aluminium case and…
- Downloads
- 34
- Likes
- 6
- Rating
- 0
P
Printablesscross01
Nozzel Adapter for Shark Euro Pro Vac
Nozzle adapter for a Shark Euro Pro 700W to use standard 32mm attachments. Might work with other similar Shark vacuum models. Inspired by the “ Portable vacuum PVC adapter ” by PocketBrain (Thingiverse), but fully recreated the fitting in…
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesMichael-3d
VZbot 330 Nozzel Cleaner Silicon
Silicon zum gießen TFC Silikon Kautschuk Typ 3 I Dubliersilikon mittelhart I Zinnguss Bleiguss, hitzebeständig I 500 g (2 x 250 g): Amazon.de: Baumarkt
- Downloads
- 29
- Likes
- 7
- Rating
- 0
P
PrintablesPste
Nozzel holder Prusa i3 Allen key holder
Just a nozzles holder with Allen key holder. Designed to be mounted under the bed Materials ABS ore PETG 2x M5x8
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesLSC
NozzleDisk - E3D V6 - up to 50 nozzels
Hi, I want to introduce you my simple, but clever nozzle organizer - NozzleDisk. NozzleDisk is avaible in 10 diffrent sizes - the biggest one can contain up to 50 nozzles! You can choose between the version with size description (official…
- Downloads
- 27
- Likes
- 9
- Rating
- 0
P
PrintablesDavid P.
Elegoo Centauri Carbon 1 & 2 Hotend Nozzel Box
beim drucken bitte auf die layerhöhe achten (bei mir 0,4 düse 0,12 layerhöhe) die passungen sind sehr genau ;-) zum zusammen bauen sind 6x M3x30mm Schrauben nötig desweiten kann man einen streifen TPU als deckeldichtung einsetzten sodass…
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesPenitent Hollow
Hidden Nozzel Drawer - Easy Print, Easy Open
I really like the original but I wanted to print it with more precise dimensions and different colours and by breaking up the design I was able to do just that! I added an extra micro SD card slot and tightened up the nozzle holes. I also…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
Printablesdirk144347
fancy nozzel holder
is a cool looking nozzel holder for your expensive nozzel 0.4 mm
- Downloads
- 18
- Likes
- 7
- Rating
- 0
P
Printablesakf_was_here
Firebay Peanut Fanduct - Chimera Dual Nozzel
My current attempt at a Chimera Version of the peanut fan duct. Should print with the same settings as the original. I've only printed the bottom section so far but I didn't alter the top section any so it should be fine. Print…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesJllo
Gridfinity Rapido UHF and Nozzel Holder
Simple little 3u tall nozzle holder for Rapido UHF spare parts
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesProfwaldone
AEG nozzel extender wireless vacuume
I need an extension to vacuum my vacuum storage bags, so I added this extension to my vacuum, and now I can easily vacuum my vacuum bags. The tolerances were surprisingly tight on this, so I'm leaving this here so others can hopefully use…
- Downloads
- 9
- Likes
- 1
- Rating
- 5
P
PrintablesPhil M
X carriage designed for E3D V5 extruder nozzel
Inspired by Simons x carriage i have adapted it to suit the E3D extruder nozzle to allow the nozzel fan housing & fan to stay in place when the nozzel needs to be removed. Due to the heater block the fan house has a cut out to allow for…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesNigel W
Hozelock Nozzel Holder
Holder for a Hozelock hosepipe nozzel so it doesn't get lost when using a wind-up hose. Printed with PLA but use PETG if in direct sunlight. There are two versions, the one in the image it attached with automotive adhesive pad and…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesBullware
3D Crossed Nozzel & Hotend
Though that the 3D printing community needed to have their own type of " Jolly Roger" symbol. Brought the elements of a printer together in this print. There are a few different versions of the model that contains different assets. I…
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
PrintablesTransAmDan28
28mm nozzel funnel with breather
I designed this funnel to make it easy to put oil into my car engine. There wasnt enough room to tip a 5 litre container without getting it everywhere. This funnel has a 28mm O.D. at the bottom, making it ideal to get inot the hold it I…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesPhil M
Budaschnozzel fan duct (with nut trap)
Here is a fan duct to suit a 30 X 30 mm fan and contains a nut trap for the extruder M4 bolt To suit my x carriage variation http://www.thingiverse.com/thing:154258 ( x plate without the E3D fan holder) Designed to be fitted on the left…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesꪶꪖꪗꫀ᥅-ꪶꪮᦔᧁꫀ
Anycubic Kobra Neo (v1) Nozzel Silikon Cleaning Pad Mount
Since my new Kobra 4 is now my new workhorse, I finally had some time to get my old Kobra Neo working again. Here is a mount for a nozzle cleaning pad. It is designed for a silicone pad that fits the Kobra 4. You need Klipper to use the…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesMarkes12344
Gridfinity Qidi Max4 Nozzel Holders
The models are to store 2x Qidi Max4 Nozzles in the Gridfinity System. They are in particular designed for 1x2x2U, Stackable, and wont spill your nozzle if stacked or within a case that "Closes" down on them. So far these are the only…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
PrintablesCaritat
Exped Schnozzel to Qunature adapter
This is an adapter that allows you to use the Exped pump bag with a Quanture sleeping pad. I have an Exped sleeping pad, and my son has one from Quanture. And since the Exped pump bag is simply the best, I created this adapter so I can…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
RatRig V-Core 4 Mandala Rose Works Z arms nozzel brush
This mod is for the MRW Z arms I included the step files if you want to edit anything. I really liked the model by @Kuroi_3472520. I just like the Qidi plus 4 silicone brushes better. Also the original left side brush was about 7mm to low…
P
Printables
Ender 5 Pro Nozzel Clean brush
Modification required before activating nozzle cleaning https://www.thingiverse.com/thing:4410969 That is the part of the code that needs to be replaced G92 E0 G1 X2.0 Y140 E10 F1500 ; prime the nozzle G1 X2.3 Y140 F5000 G92 E0 G1 X2.3…
P
Printables
Prusa Mini Revo Mintion Nozzel Cam Mount
I used 3M VHB tape to attach the camera to the inside mount and to attach the adapter PCB to the face of the hotend (I dont think there is a good spot to attach it to). the one pictured above isnt quite the same, the one in the file has a…
P
Printables
IKEA Skadis Nozzel Halter
Halter für Ikea Skadis Wand damit die Nozzeln schön aufgeräumt sind über likes makes und follower würde ich mich sehr freuen, Peace MazZe
P
Printables
EuroPlus Pro Insert Prusa Nextruder Nozzel Box
Die Box ist in ihren Außenabmessungen kompatibel mit dem EuroPlus System In Programm OpenSCAD kann man (im Fenster Customizer) sehr einfach den Text am Deckel ändern. Hinweis: Das Durchmesserzeichen ist in den Textfeldern nicht änderbar.…
P
Printables
Creality Unicorn Nozzel Holder
There are two different types of holder. One are multicolor and one are single color. Chose what ever you like the most. You can connect them in a row.
P
Printables
nozzel box
added a slot to hold the nozzle wrench for my ender 3 it is scaled at 40% of https://www.thingiverse.com/thing:1612401 you will need the drawer from the score scaled to 40% as well Print Settings Printer Brand: Creality Printer: Ender 3…
P
Printables
Makita vacuum nozzel
Print with no support. Simple PLA works good. 1H print, 25 gr 2mm think
P
Printables
Nozzel Box / Düsenbox Prusa MK4/3.9/XL
Hallo, an bisherigen Boxen störte mich das sie nicht besonders flexibel bei der Beschriftung der Düsendurchmesser sind. So habe ich meine eigene Box entworfen. Die Plaketten mit den Angaben des Düsendurchmessers kann man der Box entnehmen…
P
Printables
Thin and pointy vacuum nozzel+extension
Hi! I was in need of a very thin nozzel to clean a hard to reach spot through a tiny opening and needed better suction towards the underlying surface, so i created this one. This is my first self-made model ever, so it is not really…
P
Printables
Nozzel-Cleaner
Simple nozzle cleaner for the Bambu Lab silicone wipers. The cleaner with the silicone wipers gently cleans the nozzle without causing scratches. The wipers can be easily glued on top. I recommend at least PETG due to the heat generated…
P
Printables
RatRig V-Core 4 Mandala Rose Works Z arms nozzel brush
This mod is for the MRW Z arms I included the step files if you want to edit anything. I really liked the model by @Kuroi_3472520. I just like the Qidi plus 4 silicone brushes better. Also the original left side brush was about 7mm to low…
P
Printables
Nozzel holder for ender 3 v2
i found this nozzel holder but it would not fit most of my nozzels in it so i made some changes. it would not let me post as a remix im not sure why but this is the original person who made this Nozzle holder Ender 3V2 by DieuwertW on…
P
Printables
Wide Mouth Vacuum Nozzel for Shop Vac
Print in place, no supports needed. Print at .18 to .28(to get your desired smoothness) using your choice of filament. Fits my Craftsman and Porter Cable shopvacs.
P
Printables
Nozzel - Halterung für MK3S + und Mini
Einfach aus PLA und mit Support drucken, die Mutter einsetzten und in das ALU-Profil einschwenken.
P
Printables
K40e Laser air assist nozzel
Air assist nozzle for the upgraded version of the Chinese K40 laser Helps to blow the air where it is needed Support is built in
P
Printables
Nozzel Holder, Nozzel case, Ender, Prusa, Creality
Case for nozzles with M6 thread. The first screw-in is the hardest. Automatic color change can be set in PrusaSlicer.
P
Printables
Fuel Can Nozzel Cap
Bought a bunch of cans on closeout, first thing that'll happen to a new Fuel can is someone will lose the cap. This is my fix. Tight enough to keep fumes contained but won't let pressure build up. Added letters to help keep different…
P
Printables
Nozzel insert for Ender 3 S1 Pro Tray Insert
To store my Nozzels, I have designed an insert for my existing tray in which the Nozzels fit. Unfortunately, the numbering didn't come out well when printing. But I want to share it anyway. Print Settings Printer Brand: Creality Printer:…
P
Printables
Prusa I3 MK3s+ Nozzel Holder
This is a multi size nozzle holder. I had purchased a pack on amazon and could not find a holder that held my range of size. I made one plain and one labeled for the mk3. Currently printing in .4mm nozzle but the size text might be a…
P
Printables
Wet vacuum nozzel adapter
Adapter for a Einhell TC-VC 1930 SA vacuum and aliexpress wet nozzle
P
Printables
Insert for Prusa XL and MK4 nozzels
Printed on either XL or MK4, at 0.32mm (XL or 0.2mm (Mk4) with 2 perimeters, and 15% infil. It will fit nicely into Dmytro's Nozze Case, as the case is 10x sized, and there is ample height to hold 15 nozzels. 5 at 04mm 5 at 0.8mm and the…