Voron 0.2 Rapid Burner + Mellow ALPS + LDO Picobilical + Orbiter v2 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the Voron 0.2 with a Rapid Burner toolhead, Mellow ALPS board, LDO Picobilical, and Orbiter 2.5 extruder.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This toolhead board mount is meant for the specific combination of:
Voron 0.2 carriage
AMOVFC's Rapid Burner toolhead remix for Heatcore 4 ALPS
This toolhead mod moves the toolhead upward. It is not compatible with an unmodified Rapid Burner.
LDO Picobilical (Part of LDO Voron 0.2 kits)
In addition, the following are required:
3x M3 heat inserts (Voron spec)
4x M3x8 screws
3x M3x6 screws
The mount attaches to the 2 lower screws of the Voron 0.2 carriage (M3x8) and 2 screws on the extruder (M3x8). The Mellow ALPS board mounts with a single M3x6 screw, and the LDO Picobilical mounts with 2 M3x6 screws.
Supports are required for the overhangs with the carriage mount.
As shown, this is printed in Black Siraya Tech ASA-GF on a Prusa CORE One+ (Gen 2) using Voron-spec printing parameters.