1 / 3
Voron 0.2 Rapid Burner + Mellow ALPS + LDO Picobilical + Orbiter v2 Mount — zdjęcie 1
1 / 3

Voron 0.2 Rapid Burner + Mellow ALPS + LDO Picobilical + Orbiter v2 Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for the Voron 0.2 with a Rapid Burner toolhead, Mellow ALPS board, LDO Picobilical, and Orbiter 2.5 extruder.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This toolhead board mount is meant for the specific combination of:

In addition, the following are required:

  • 3x M3 heat inserts (Voron spec)

  • 4x M3x8 screws

  • 3x M3x6 screws

The mount attaches to the 2 lower screws of the Voron 0.2 carriage (M3x8) and 2 screws on the extruder (M3x8). The Mellow ALPS board mounts with a single M3x6 screw, and the LDO Picobilical mounts with 2 M3x6 screws.

Supports are required for the overhangs with the carriage mount.

As shown, this is printed in Black Siraya Tech ASA-GF on a Prusa CORE One+ (Gen 2) using Voron-spec printing parameters.

Tagi