Liczymy pasujące modele…
I tried to reproduce the number row keycap from my Apple Extended keyboard for trying to print with PETG, painting keycaps and making some test. There is 2 base fusion 360 models that you can change and learn from and 3 STL variations.…
I had a bunch of Alps switches and needed arcade buttons. Category: Video Games
I bought an Alps Mountaineering dining table from a thrift store for cheap, because it was busted. the plastic mounts that hold the table slats to the frame get lost easily, and while you can bend the edges of the slats inward to fix…
I printed it in Silk PLA with 0.2mm layer height, 0.4mm nozzle, and 20% infill. I recommend 0.2mm layer height as the model is 2.8mm tall and needs to be that tall.
This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…
I printed it in Silk PLA with 0.2mm layer height, 0.4mm nozzle, and 20% infill. I recommend 0.2mm layer height as the model is 2.8mm tall and needs to be that tall.
A mold to create your own alp relief of the Nagelfluhkette.
This template can be used to recreate the rubber feet on the Standard Apple ADB keyboard MO116. Best fit I found was 0.8mm rubber sheet with a thin double sided tape on one side to attach it to the keyboard after cleaning the old guu off.…
Mountains around Zermatt with all 4000m indicated (38 of 82 in the alps !). An 1mm hole is integrated in project to place a paper clip with the name File given is with variable height 200um down to 50um, is very long to print. You can…
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
ALPS Switch Conversion Plate for Atari CX-10 Convert your Atari CX-10 joystick into an Alps-switch joystick! Choose between two plates: What’s Included CX10_Alps_High.stl — raises switches for instant clicks , but more sloppy (will press…
Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…
Encoder knob for my MB-6582 groovebox, and more ergonomic replacement for ALPS knobs. Adding FreeCAD and 3mf sources. Go fancy with Flex 93A( green glow effect) and you'll never miss the beat in tha club ;)
Encoder knob for my MB-6582 groovebox, and more ergonomic replacement for ALPS knobs. Adding FreeCAD and 3mf sources. Go fancy with Flex 93A( green glow effect) and you'll never miss the beat in tha club ;)
Dragon Burner remix to fit Alps hotend from Mellow with module. Rest of parts for extruders can find in original place https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner no, its will not work with Dragon UHF, its sorter how…
Confirmed good fit with PLA at 0.1mm and 0.2mm resolutions, 100% infill.
update 7/6/2026 added the normal dragon burner toolhead, slightly do configuration since i broke one of my alps sensors so i ordered a new one, but accidentally got the one for the goliath hotend rather than for the heatflux. the…
Customized version of https://www.thingiverse.com/thing:468651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=468651 Instructions Using the following options: key_length = 1.75 key_height = 1…
IKEA ALPSTUGA alternative housing with some nice to have features. This alternative housing introduces wall mounted option, a battery option to keep it operational during outage or to use solar panel for power! It's your call! You are the…
Description This simple mount allows your IKEA ALPSTUGA to be placed on a monitor, tv or similar object. Parametric Fusion 360 file is included. Different stls for different monitor thicknesses are included. Printing Instructions Print it…
Cover for the Ikea Alpstuga air quality sensor. The display can't be turned of and is too bright for a bedroom
This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…
https://deskthority.net/wiki/Alps_SKCC_Cream There are two models - one with the full detail of the original part, and another simplified for easier reproduction. Both should be functionally identical. Category: Replacement Parts
https://deskthority.net/wiki/Alps_SKCC_Tall_Cream There are two models - one with the full detail of the original part, and another simplified for easier reproduction. Both should be functionally identical. Category: Replacement Parts
Replace missing keys from your ALPS-style Apple II keyboard with commonly available Cherry MX-style keys. Category: Computer
Replacement adapter for the "ALPS Short Stem" keyboard switch for the Apple II or II+ See the pictures or this archived Apple documentation for details: https://archive.org/stream/DTCA2DOC-223_repair_IIe_1989#page/n53/mode/1up This is the…
Small holder to mount your ALPSTUGA on top of your monitor. No glue or hardware needed.
NOTE: This model is to be used with the back and bottom plate of this model: Have you used Mellow ALPS heatcore 4 with your EVA 2.4 and Mercury One.1? Then you must know that it is too long and therefore not supported by even the UHF fan…
A4T cowl for using Mellow Heacore 4 UHF (No ALPS module) + hotend fan duct Only for Ortbiter 2-2.5 and XOL carraige Use the same print settings as listed in the A4T GitHub Page Need to use the Orbiter 2.5 extruder adapter that is in the…
Famous Art - Napoleon Crossing the Alps by Jacques-Louis David - 1801 3D printable model.
Mellow ALPS: https://aliexpress.ru/item/1005011610938214.html?sku_id=12000057522107054&channel=choice
A simple tool to open up Alps and Matias keyboard switches. You'll probably want to print my new switch opener tool instead of this one: https://www.printables.com/model/201337-alps-switch-opener-v2
This is a much faster and more effective tool for opening Alps switches than my first attempt . Even very dirty switches, which are quite difficult to open using the toothpick method or my old switch opener, aren't a problem at all.…
I designed this to use an M6 bolt with a spring. Category: Video Games
These are little tools to remove switches from mechanical keyboards plates. The shell goes over the switch bottom housing and pushes on the little retaining clips, the slider goes in the shell to push on the switch and release it from the…
Simple wheel for the uncommon Alps EC40 encoder, press fit and open top to allow stuff to pass through.
Modelo defectuoso pero suficente para placa amplificadora de audifonos acompañada por los componestes disponibles en tienda local de electronica y otros elementos aleatorios a la mano Considerar solo como un modelo base para hacer sus…
Here is the version for MX Switches https://www.printables.com/model/135614-plate-fork-cherry-mx
So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…
This set is identical to my Cherry MX-compatible keycap set (https://www.printables.com/model/397180-complete-cherry-mx-stem-keycap-set-optimized-for-3) but it was generated with Alps stems. Below is a copy-paste of that model's…
Keychain to hold an Alps/Matias keyswitch Print instructions Category: Keychains Summary Keychain to hold an Alps/Matias keyswitch Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
Looking for a quick and easy way to customize your EC11 Alps encoder knob? Check out these Encoder Knob Model designs, now available on Printables! These designs allow you to create your own unique encoder knob, whether you want to add a…
Modular accessory mount for the ALPS Mountaineering Camber Chair. This is a comfortable camp chair but it was missing a much needed cup holder. I designed a mount that attaches to the chair, along with accessories that slide onto the…
Thrustmaster Warthog Slew Stick Mod. Models and STLs for use with instructions at https://github.com/ServError/Thrustmaster_Warthog_Throttle_Alps_Slew_Mod
Support for the ALPSALPINE RKJXU joystick. It features two holes for mounting the joystick with two M2 screws. I suggest printing with a resin printer, due to the small size and little dents and holes. I attach the full 3D model so you…
3D model of Dachstein surroundings. The height is 2x multiplied. (The model has a high resolution and can be printed much larger.) Print Settings Printer: Molestock Rafts: No Supports: No Resolution: 0,2 mm layer height Infill: 16%…
This is a lube station for Alps SKCL/SKCM series Actually this is usable, but maybe to much flexible. Also there is a « test » file to test the fitment before printing the whole part. Considering that this is a file from a previous…
Important notice Thoses models cannot be used with a Apple Extended Keyboard ISO version (e.g. The azerty one). All the switchs location are shifted and required both different plate design and case design (Holes aren't compatible with…
Keycap with the Commodore logo on it, for ALPS keyboard switches
A small device to hold in the clips on the underside of Alps switches to make it easier to get them out of plate. Push the device on to the back of a switch and press a pencil or pen through the hole. Bam!
Designed to be printed without supports, flip the 3D model file upside down.
Recommended 0,2 mm nozzle 0,12 mm height of each layer For to much stringing use a lighter to remove the fuzzy strings, but be careful Digital elevation data (Attribution) Global ocean terrain GEBCO Compilation Group (2023) GEBCO 2023…
Alps switch opener, just squeeze and yank. converted the opener to use an m2.5 nut and screw/bolt to fasten together instead of being print in place as the tolerance required to get a working print was very difficult to achieve. print 2…
The model was taken from google earth via RenderDoc and due to the generation of the mesh in this process the model needs to be auto-repaired in the prusa slicer.
