1 / 4
Apple (ALPS-switched) Standard keyboard MO116 Foot template — zdjęcie 1
1 / 4

Apple (ALPS-switched) Standard keyboard MO116 Foot template

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can be used to mark - cut out 0.8mm rubber sheet to create replacement feet for the Apple Standard keyboard as pictured.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This template can be used to recreate the rubber feet on the Standard Apple ADB keyboard MO116.

Best fit I found was 0.8mm rubber sheet with a thin double sided tape on one side to attach it to the keyboard after cleaning the old guu off.

Three ways this can work (I tried all successfully) 

  1. Use masking tape on the rubber sheet and then mark the tape with  sharp pencil
  2. As above but spray or brush paint through the template
    with the two above.. simply cut around your markings.
  3. Hold the template directly on the rubber sheet and cut out with a pointed craft blade..

 Print full infill base down..

Tagi