Liczymy pasujące modele…
A smaller-scale princess peach costume parts. Print as lightweight as possible to keep from sliding around on the head. I'd recommend 1 perimeter and low infill %. Designed in mind without needing support. All that's needed to complete is…
Need a headband? You're in luck here's one. There's also an f3d file available for an easier remix! Note: Print from the side you can see has a chamfer on it's teeth facing downwards!
found this lil guy on my old drive, no idea where i got him from
Hi all! This is my first from scratch design in Fusion but really happy with the outcome, I've been using it for a couple months and it checks all the boxes of what I was looking for. My wants for this project Put the Uno at a 45 degree…
Simple headband. Works great in PLA, didn't test any other materials.
unicorn headband for the delight of little girls
Now much stronger and reliable with optional folding! NOTE: if you bought the kit it does not include the parts to make the folding version! Static only! Something to note: If you are not printing your PETG hot enough then the adjustment…
This is a remix of Arduino Case by 3DP . I've added a button to access the reset switch, removed excess material to make it slightly thinner, added a groove between the top case and lid to prevent any possible wobble, widen the tolerance…
QuadBee - Defend Your Country! Slava Ukraini! All funds gained from donations and affiliate commission will be going to Ukraine. This listing is for the printable model/CAD files. The full project source of truth lives on GitHub, where…
Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…
Diameter 120 mm, you can scale up to larger sizes.
Made these for a Shrek rave I went to Made with Vanilla White Prusament and painted green Needs supports because the ears are wider than the headband
0,15mm Layer height I've printed mine in PETG
This holder should hold about 6 Mickey/Minnie ear headbands. You print two of each part (the rails and the end caps) and assemble with a drop of superglue. (Or press fit if you want to be able to take them apart for storage.) No supports…
I had the problem with my Astro A50 that the headband cushion always flipt out because of my big head. so I made a clamb for fixing. Tested with Astro A50 Gen. 4 and Mod Kit filament used: black PETG with 50% Inflill (same as full)
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
Step into the world of Lilo & Stitch with this original 3D printable headband inspired by everyone’s favorite alien, Stitch! The model is designed for easy printing on standard FDM printers and offers a comfortable fit. The ears are…
I am reuploading this so others can find it on Printables. All pictures on this model are the ones that I personally printed. I have also made a slightly larger version of the headband as the original was too tight for my head. You can…
This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…
Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…
This is a headband for the MINI 13 of Soozafone : Fits perfect and makes your Mini 13 looks very stylish without much filament and time. ____________________ Print settings: Nozzle: 0.4mm Resolution: 0.16mm Support: no Filament: PLA print…
Hello, Today I have a New Year's Headband for you 2026 . A great accessory for a New Year's party. Suitable for group photos. I used ASA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…
This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…
Ring in the New Year with this bold and stylish 2026 headband ! Designed to be lightweight, comfortable, and easy to print, this hair accessory is perfect for New Year’s Eve parties, events, or just showing off your excitement for the…
Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…
After printing, carefully heat with a hair dryer and bend to fit.
Use supports and glue the horns onto the headband. 50% infill.
I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…
The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…
I was designing the flowers when this competition came up and I thought they would be great for a head band. My wife then suggested a Bow! Hope you enjoy. There are so many great colours in PLA now that the headband would look great on…
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
A celebratory headband for children and adults alike! Print at 100% scale for adults or 85% scale for kids. After printing, you will need to trim off the bed adhesion disks at the ends of the headband and check for sharp edges, then you…
Tool to cut and bend wires for use in a breadboard. To use the the tool: Count how many holes are between the two nodes you wish to connect (including the nodes themselves) Find the equivalent number on the tool. Cut the wire to that…
I've printed these with 0.20 mm layer height and a 0.4 mm nozzle. Breadboards are attached to the holder by sliding them in. Remove any adhesive pads from them first. The breadboard should stay in place fairly tightly, but if not you can…
This is a simple tray for securely mounting a full sized breadboard and Arduino Uno. It includes screw holes for M3 or 4-40 machine screws to securely mount the Aurduino. The breadboard can be secured using the adhesive pad which is…
After 2 years of use these pieces broke in my headphones. I believe that is a common thing after some time. I created a 3d model to replace the original, and it works great! Probably better printed in PLA for rigidity and in PETG for…
This is the plate for the headband of Naruto (if someone needed to be told). I design it on fusion 360, it's about 10 cm long, 4,5 cm wide and 3mm thick. Print instructions Category: 3D Printing Summary This is the plate for the headband…
These are designed to slip onto a thin metal headband. Printed in PLA at 100% infill with print thin walls enabled.
DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD) Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: self made PLA 1.75 White Notes: nozzle 0.8, print speed 50 Category: DIY
Remixed from Max666's Heavy Metal Baby Groot as well as 3D Printy's bobble head springs. I thought Groot should headbang as well as throw the horns
Based on different existing models Can be printed without supports Uses 4 DIN 7991 M3-16 Screws and 4 M3 nuts
Breadboard for esp32 Since I have the ESP32 and try to build circuits I have problems because I only have one free space left to connect to the standard breadboard. So I decided to make a version so that it's in the first column and free…
Update: Don't want to delete the post, but this version has been further reduced in size and improved, so here are links to the newer versions: For the original Shield (240 x 240 mm), here:…
This is a modular holder system compatible with an Arduino Nano, Arduino Uno, or ESP32. You can customize the setup by combining the microcontroller holder with the breadboard holder according to your needs. Simply connect the two modules…
This is a potentially universal solution for headband replacements, I am actively seeking out more headphones to adapt to this design. Right now the HD6x0 series of headphones, the Aurorus Borealis and Australis, and my original designs…
Currently supported calibers: .22LR 9mm Luger .45 ACP .380 ACP 5.56 NATO 7.62x39mm .308 Win 12ga 2.75" This list will expand over time - leave a comment and I’ll be sure to include all requests in the next build. --- What in tarnation is…
Shelf system for miniatures showing in 8 variations. This shelfs are lightweight option for display miniatures and can be combined together as you need. Valentine headband in doll size (1:6) with shape of three hearts. Printing from PLA,…
This is a soldering jig for helping align things like header pins on circuitboards that follow the 0.1 inch breadboard convention. The jig has 15 x 15 holes. Both designs are the same except one has clip holders if you use something with…
CHANGELOG: 4/2/2020: Updated the model to have more support between bands. This makes it a little harder to pull apart, but ensures that the bands adhere well to each other, as I found that some layers would not adhere and cause stringing…
A headband with cat ears in a minimalistic look. Works fine when printed in PLA.
Take your half-size bread board, and jam it into this here thing, and BOOM, it looks all spiffy. That's all this really does. It does feel nice to hold and you could argue the breadboard itself is now more stable, but mostly I was just…
This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…
Based on the Headband "Brasil V2", but with A4 format shield. Reduced size/volume of both headband and the lower reinforcement. See pix for comparison. Included two DXF for the A4 sheet as well - Portrait and Landscape. The 3D printed…
An adult sized headband with comb teeth - The teeth should point towards the back of the head. Push headband in your hair starting from the forehead. I modelled this after my old headband with slight modifications. I printed it in silk…
I printed this with PETG and 0.2 layer hight. Changelog: 16.07.2025 Optimised for better printing ----------------------------------- Das Model wurde mit PETG und 0,2mm Layer höhe gedruckt. Changelog: 16.07.2025 Für bessere Druckbarkeit…
It's a festive headband with deer antlers. You could wear it a party. This is a mashup of two great projects: the antler headband by brendonoleary and project headband by calmabalot . Compared to the existing antler headband, this one…
The larger holds a Raspberry Pi 2/3/4 and a half-width breadboard. The smaller is made for a Raspberry Pi Zero. Nothing too complicated - just handy prototyping cases in solid and slotted bottoms. Both accept 4x M2.5x4 (or M2.5x5)…
3D print custom accessories for AirPod Max headphones! These ear covers and headbands are LEGO compatible so you can personalize your headphones! Use LEGO DOTS tiles to make mosaic works of art and adorn them on your ears with 3D printed…
Another portable station for the Arduino Uno. I wanted a holder that put my Uno in a specific orientation and secured it with screws so it wasn't flying off every time I pulled out a lead. I used the negative space to place a big tray and…
The height is 3 mm only, so it will print fast. I recommend using PETG, as it's flexible. PLA might be too brittle. Pro tip: use translucent PETG and choose some fun infill pattern!
If you own a Prusa XL, print any design from the Prusa XL folder If you own a Prusa mini, print the Prusa mini - Headband-v2_band.stl + the 2 parts (left + right), choose your favorite style : lines (for the same style as the photo…
I printed it with hatchbox transparent green pla and had to dry it out for 8 hours to get the moisture out. You can print it in any of color you want and it does not need to be transparent, as the walls are printed thin enough that it…
the Cube Seatpost fixture can also be used as gopro fixture
Remix of Perplixis' case on thingiverse. Updated the breadboard section to fit regardless of which side the tabs are on widened the arduino side and added mounting hole supports which will accept M3 heat-set inserts.
The headband, created by NX3CREATIONSLLC, was too small for my head. I am a larger person and needed something bigger. This is a remix that adds 10mm in-between the ear mounts. I have also added some spikes on the lower portion of the…
I used a concentric sparse infill pattern, which should help out a bit with any cracks forming between the layers. PLA is plenty stiff with the geometry I made here, just push your bed frame up to the wall to pre-load the spring a bit…
This is a series of bases for Arduino UNO and similar expansion boards. I wanted a solid base to keep my boards along with a typical 830-pin breadboard for my projects. I was initially inspired by Dimiwit-Dave's designs but since those…
This 1x1 Gridfinity Holder will hold up to 3 Breadboards. Just print at least 2 Holders and space them to fit your Breadboards length. The regular sized Breadboards like BB830T from BusBoard Prototype Systems (or a cheaper clone) will fit…
This is a ninja headband specially designed for the articulated Dummy 13 model. I have created this model in blender.
Small project box with both M2 and M3 mounting holes for your ElectroCookie ½ Sized breadboard. Includes 2 x 11mm holes on the end to fit barrel plugs or grommets. Has a little extra space against the wall with the holes to accommodate…
I made this model last-minute for the Halloween by mashing together 2 other models. You might need to scale this +-10% to fit your head size. Do print the headband before you print the ears to make sure that it fits comfortably. Headband:…
Just needed it for a cosplay, might as well post on here.
What: Workspace for Elegoo Arduino Uno R3 and Breadboard - essentially the hardware that comes with the Starter Kits you can buy or standalone. Two different orientations depending on preference/need. Notes: For some reason the bottom…
***PRINTING TIPS: If using a .4mm nozzle, print 3 walls and make sure walls, infill, and skin patterns are concentric. If any of the layers are not concentric, the band will not be flexible. Check each layer to make sure the slicer didn't…
Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file
Do you ever need to place an arduino nano on a breadboard? place this case on it to protect it while you still have access to GPIO Designed on Fusion360 Print in PETG or PLA - easy slot together
Sized for a 5yo, scale up as needed. Fits on a MINI. Add a 2 color changes to add different colored layer to make the interior of the ears a different color. Updated 3/19/2023 to add print files and 3mf file with material change at two…
2025 headband New years headband, to celebrate the new year Doesn't need supports to print, but if you have poor bed adesion recomend brim Hope you like it
No support needed, stick some nice googly eyes :) tip for prusa mini : remove the skirt, you can print it at 100% (adult size)
This is an easy to assemble headband holder. Overall length 23cm No screws needed. Parts should have a snug fit. If not, try cleaning the slots. This depends on your printer tolerances. You can also use glue to secure them together.
Momentan habe ich gerade einen neuen Ball in Arbeit . Mit neuer Form . Aber ein bisschen Zeit brauche ich noch . Mfg Hannes
Family wanted a headband holder and I couldn't find any decent ones out there and I knew I could do better so I drew this one up. There are 2 parts that need to printed and glued together so no supports needed. I printed this in PETG in…
Small wrench for AdBlue lid Fits for Audi A6 and others Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20 Filament: Prusament PLA Yellow Category: Automotive
This tool helps bending wires for use on breadboard. Simple as that. Print instructions Category: Electronics Summary This tool helps bending wires for use on breadboard. Simple as that. Print Settings Printer Brand: Prusa Printer: I3…
Single Infinity headband. Design your own attachments and add them to headband. Here are some of mine: https://www.thingiverse.com/thing:3665767 and https://www.thingiverse.com/thing:3663139 and a smoother version may work better. Thanks…
Remix of RC3 3-hole punch 6x stacked face shield. With support ends and without. 3mf file includes supports. 3mf file setup similar to Offical 4x stack from Prusa. There is also a 3mf file for a Creality 3D 10S Pro to print 18x at once!…
Our builder group was unable to source buttonhole elastic for the Prusa Face Shield. We had to fall back to bulk standard flat elastic material. This clip allows a removable and infinitely adjustable elastic band and clip to be fit to any…
That's a great idea! Including specific print settings makes your product much more appealing and easy for makers to download. Here is the revised description, including recommended print profiles and the size you specified. 🎉 Product…
As both of the clamps on my headset were broken, I designed some new. The shape is hard to measure so it's not 100% but good fit. I ran though a lot of iterations to get it like that and ended up with these parameters: PETG(-CF) 0.16…
This is a collection of blank ears to accompany Disney Interchangeable Headband and Ears . Each blank is at different depths and is perfect for painting a custom creation. Disney Headband Blank 1 - No fill Disney Headband Blank 2 - 2.55mm…
Four Leaf Clover headband to celebrate St. Patrick's Day
Simple clips to mount a breadboard to a DIN rail. Made to fit with the foam backing still on the back of the breadboard. Also check out my other DIN mounts on my profile :-)
Dummy 13 headband with cat ears on it! Make sure you print at a small layer height so it actually prints well. Depending on how accurate your printer is, it might need some sanding to fit right, but it should at least sit on the 100%…
Update 11/19/2025 - Recent request for the outside slider cover, so I decided to go ahead and add it in. I also did a mild update to the inside slider cover. I think I can do a better job but if this means someone's headphones work vs…
A stylish devil horn headband, perfect for Halloween or themed events. The horns are made of two parts and screw onto the headband using an M16×2 thread , ensuring a secure and easy assembly. The headband has a 120 mm diameter , making it…
Slim Arduino Uno Case with breadboard mount Overview: -This sleek, two-part case is specifically designed to house and protect an Arduino Uno. You can attach a breadboard by slotting two extrusions on the breadboard into the slots in the…
4x2 grid that holds 830 point boards.
