Beholder Motor Visualizer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.53 net (excluding VAT)
For file: Beholder v6_0.15mm_PLA_MINI_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 34.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Beholder to keep an eye on your prints.
- Rating
- 5 / 5
- Likes
- 70
- Downloads
- 142
- Makes
- 4
- Views
- 2,729
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
There's times where you just can't seem to keep an eye on those pesky prints. Well, let this Beholder do that for you.
Prints without any supports. The only thing you're going to need is some glue or other sticky thing to mount the peg on the eye to a magnet (most are 6mm diameter or less for the motor) and then place that on the motor. The head can then be mounted with stickies using the raised portion on the back. Take care to get things somewhat centered during this step, there's a bit of clearance needed for the eye to move inside the raised ring.
